Best Answer

The value of the stack would depend on how worn the dimes are. If you accept that a US dime is between 1.35 and 1.40 mm thick, then the value of the stack would worth between $264.30 and $274.00.

37cm * 10 mm per cm / 1.35mm = 2740074074074074 ~ $274.00

37cm * 10 mm per cm / 1.40mm = 264.285714285714 ~ $264.30

Q: What is the value in dollars of a stack of dimes that is 37 cm high?

Write your answer...

Submit

Still have questions?

Continue Learning about Other Math

It depends on how many dollar bills you have! Lacking that variable, one US dollar is 0.0043 inches thick. So, a stack of one million dollars is about 358 feet four inches high.

$1,389,473,684.20 Assuming that a single bill is 0.0043 inches thick. You would have to have a stack of 100's 10,795.45 miles high to equal the United States national debt of 15 trillion dollars.

12 x 3 / 4 = 9 The stack is 9 inches high.

60

A billion dollars in one dollar bills will make a stak that is roughly 68 miles high 1,000,000,000X.0043 = 4,300,000 inches. 4,300,000 inches/12=358,333.33 feet 358,333.33 feet/5280 (mile)= 67.86 miles So the answer is about 68 miles.

Related questions

Nickels, dimes are only slightly smaller in height than nickels.

5+5

The stack would be about 678.66 miles high.

If they are one-dollar notes, the stack would be 47.51 miles high.

Approximately 67.87 miles high.

About 67,866.16 miles tall.

- If you want to lay out a bunch of dimes carefully side by side on a straight line that's 1 yard long, then you'll need 52 of them. ($5.20 worth of dimes, 17.91 mm diam) - If you want to stack a bunch of dimes carefully onto a pile that's 1 yard high, then you'll need 678 of them, and the stack will weigh 3 pounds 6.2 ounces. ($67.80 worth of dimes, 1.35 mm thick, 2.268 grams)

Back in the late 1970s I actually saw a hundred thousand dollar bill. If they still made them our stack would not be that high even for a trillion dollars since it would only take ten million of them to make a trillion dollars. But even that stack would be a sight to behold. But they stopped making that domination of bill back in the mid 1960s, 1964 I think. On our way to how high the stack would be in 100 dollars bills for the trillion dollars, most paper money (though it is not made out of paper these days), is .0043 inches thick, so one trillion in 100s would be a stack that contains 10 billion bills. The stack would be 678 MILES thick/high. It works out something like this: 10,000,000,000 times .0043 equals 43,000,000 inches which equals 3,583,333 feet which equals 678.66 MILES. If it was 50s the stack would be twice as high or 1357.32 MILES. If its 20s the stack would be 3393.30 MILES high. In 10s it would be twice as high as the previous or 6786.60 MILES and in one dollar bills it would be ten times higher or 67866 Miles high. So in Ben Franklins the stack would be 100 times smaller 678.66 Miles high. That amount in the value of the National Debt would be a stack 10179.92 MILES high. All figures are rounded to the second decimal point.

Based on the research done here (http://www.cockeyed.com/inside/million/million.html) A million dollars worth of $100 bills makes a stack about 40 inches high! If you do the math, that means a Billion is 3,333 feet high and a trillion dollars would make a stack over 3 million feet tall or roughly 630 miles high!!!

You'd better find a tall ladder: the stack would be 3,583.33 feet tall.

One million 1-dollar bills would be about 358.33 feet tall.

It depends on how many dollar bills you have! Lacking that variable, one US dollar is 0.0043 inches thick. So, a stack of one million dollars is about 358 feet four inches high.