400ml
If you know the volume of something you can find its weight (or mass) if you know it's density. Density is a measure of a substances mass per unit volume. So for example; Q: How much does 0.5 litres of water weigh? A: The density of water is roughly 1 gram per cm3. A cm3 is the same as a mL (millilitre), and there are 500 mL in a 0.5 litres. So, weight = 1 g/mL * 500 mL = 500 g You can find densities of various substances on the internet or in reference texts.
As defined by the metric prefix milli, meaning 10^-3, 1000 mL of water are contained in a L bottle of water. For that matter, 1000 ml of anything are contained in a L bottle of anything.
The answer will depend the volume of the bottle and the temperature and pressure. Assuming that the experiment is carried out at normal temperature (20 deg C) and one atmospheric pressure, the density of water is 0.9982071 grams per cm3. So, if the volume of the water in the bottle is V cm3 = V cc or V ml, then the mass of the filled bottle is 25 + V*0.9982071 grams.
25%
120 ml
There is 500 ml of liquid and 70% of it is alcohol so 30% is water. .3x500 =150 so 150 ml of H2 O Note 30% = .3=3/10 and 3/10 x500=1500/10=150
A standard water bottle typically holds 500-750 milliliters of water.
1 gram = 1 mL so;500 g = 500 mL34
The volume of 500 grams of water is approximately 0.5 liters.
Well, isn't that just a happy little question! To find the mass of the ketchup bottle, we can use the formula: mass = density x volume. So, the mass of the bottle would be 1.43 g/mL x 500 mL = 715 grams. Just like painting a beautiful landscape, it's all about following the steps and enjoying the process!
25%
I have seen plastic bottles of water in MANY sizes from 100ml to 4,000 ml.
About two cups full.
Porosity is calculated by dividing the volume of voids (pores) by the total volume. In this case, the volume of voids is the difference between the volume of water added and the volume left on top of the saturated soil (400 mL - 150 mL = 250 mL). The total volume is the sum of the dry soil volume and the water added (500 mL + 400 mL = 900 mL). Therefore, the porosity of the soil is 250 mL / 900 mL, which is approximately 0.28 or 28%.
To make a 500 dilution, add 1 part of the substance you are diluting to 499 parts of water. For example, if you have 1 mL of the substance, you would add 499 mL of water to make a total volume of 500 mL for the dilution.
An empty 500 ml plastic bottle typically weighs around 10-15 grams.
Of course, depending on the dimensions of the bottle: a bottle with a volume of 5-100 mL is considered small.