what is the weight per square foot of 22 ga. corten?
a square foot of lead has no weight since it has no thickness
100 pounds per square foot (also denoted 100 psf) is most likely a pressure value. Think of it as having a block of steel 1 ft by 1 ft, weight of 100 pounds, and placing it on a flat surface. The pressure on the flat surface from the block of steel equally distributed over the 1 square foot area is 100 psf.
The standard weight of 24 gauge sheet steel ... notgalvanized, stainless,or aluminum ... is 1.000 lb per ft2 .
The density of steel varies, but if we assume it's 7.9 grams per cubic centimeter, then the weight of a 12" x 12" x 1/4" chunk can be calculated. There are 36 cubic inches in the chunk of steel (multiply the dimensions together), and there are about 16.387064 cubic centimeters in a cubic inch. That means there are about 573.54724 cubic centimeters in 36 cubic inches. At 7.9 grams per cubic centimeter, there are about 4531.023 grams of steel in 36 cubic inches of this alloy of iron. There are about 4531.023 grams or 4.53 kilograms, or about 9.989 (almost 10) pounds of steel in your twelve by twelve by one quarter piece. The answer in English units is 1 square foot of 1 inch steel weighs 40.8 pounds. take length times width in feet times the thickness in inches times 40.8 to find the weight. In answer to your question the weight would be 10.2 lbs. 1' * 1' *.250*40.8
The density of a substance is usually measured in weight units per volume (for example, per cubic foot), not per area. For a square foot... it would depend how thick the slab of granite is. That may vary between different manufacturers.
The weight of steel diamond plate per square foot depends on its thickness. Steel diamond plate that is 3/16 inches thick weighs 8.70 pounds per square foot. 3/8" plate weighs 16.35 pounds per square foot.
That would also depend on the thickness of the steel plate.
The weight of SA 516-70 steel plate per square foot varies depending on the thickness of the plate. As a general estimation, the weight of SA 516-70 steel plate is approximately 41.82 pounds per square foot for a 1-inch thick plate. You can calculate the weight for different thicknesses using this basic weight per square foot.
A square foot of quartz has no definite weight because a square foot has no thickness.
a square foot of lead has no weight since it has no thickness
Mass is an attribute of 3-dimensional objects, not 2-dimensional objects. A square foot of steel, with no thickness, cannot exist. Furthermore, the density of steel, depends on the exact composition of the alloy.
Granite is figured at 168 pounds per cubic foot. If you know the thickness, you can determine the weight per square foot.
Depends, of course, on the density of the steel.
Is it foot or 30mm? You need to know what kind of steel first, With steel been a iron-alloy you can have 1000,s of different kinds and each has a different weight
The weight of 1 foot of steel rod would depend on the diameter of the rod.
Granite is figured at 168 pounds per cubic foot. If you know the thickness, you can determine the weight per square foot.
The weight of one foot of a three-quarter inch diameter steel bar will be approximately 1.42 pounds.