A square meter is a measure of area, not volume.
For a raft foundation, the amount of steel required is in RCC per square meter. This can be calculated using the value of 18 kilograms steel per square meter.
with a ruler
what is the weight per square foot of 22 ga. corten?
The weight of 1 square meter of carpet can vary depending on the type and thickness of the carpet. On average, a medium-weight carpet can weigh around 2-4 kilograms per square meter. However, heavier and denser carpets can weigh up to 5-7 kilograms per square meter. It's important to consider the specific characteristics of the carpet in question to determine its weight accurately.
You cannot weigh an area, but you can weigh a volume... so, one cubic meter of stainless steel weighs 7480 - 8000 kg. See related link for the source.
you need the thickness too
The weight of mild steel can vary slightly depending on the exact composition, but as a general rule of thumb, the weight of a 2mm thick hot rolled commercial quality mild steel sheet is approximately 15.7 kilograms per square meter.
What is the weight of steel in one meter cube equal 78.5 kN
They are the same.
The weight of a 12 mm mild steel (MS) plate can be calculated using the formula: Weight = Volume × Density. The density of mild steel is approximately 7850 kg/m³. For a 1 square meter (or 1000 mm x 1000 mm) plate, the volume is 0.012 m³, resulting in a weight of about 94 kg per square meter. Therefore, the weight of a 12 mm MS plate depends on its dimensions but is approximately 94 kg for each square meter.
The density of steel is 7850 KG/M3
To calculate the weight per meter of a 140x140x12.5 SHS (Square Hollow Section) mild steel, you would need to first calculate the cross-sectional area (A) of the SHS using the dimensions provided. Then, you can multiply the cross-sectional area by the density of mild steel (7,850 kg/m^3) to get the weight per meter.
For a raft foundation, the amount of steel required is in RCC per square meter. This can be calculated using the value of 18 kilograms steel per square meter.
with a ruler
The weight of 10mm tor steel rod is approximately 0.62 kilograms per meter.
what is the weight od 25x25x3 mm mild steel angle per meter
DxD/162 this is the formula for finding unit weight of steel