The approximate size of a 30 cm by 60 cm tile in inches is 12 inches by 24 inches. When you convert 30 cm to inches you get 11 13/16 and when you convert 60 cm to inches you get 1 foot and 11 5/8.
1.94 sq ft approx.
They are in a ratio 1 to 3 and so the width of the red tile is 20.25 inches
85 square feet is the area of a room that measures eight by ten and a half feet. This is the size of a typical second bedroom. If there was a floor tile that measured 12 inches by 12 inches, this would be 85 floor tiles.
The perimeter would be 4 inches !
If linear feet is measured by the standard 12 inch scale, then: * 1 linear foot = 12 inches * 24 linear feet = 288 inches If you have 13 inch tile then: * 288 inches / 13 inches = 22.15 tiles per row.
1.94 sq ft approx.
Convert tile size to inches X inches. Multiply together. Divide by 144.
In an episode it shows his foot in relation to a linoleum tile. Most linoleum tiles are 12 inches wide and his foot takes up the whole tile. Size 14 shoes are 12 inches long. So assuming the tile was 12 inches wide, he wears a size 14.
The standard unit of measurement used for determining the size of a tile is typically in square inches or square centimeters.
It depends on the size of the tile and the location in need of repair. Tile repair can cost $100 and up. Depending on the extent of the damage, you might be able to repair it yourself.
To find the largest size of square tiles that can be used to tile an area of 42 inches by 72 inches, we need to determine the greatest common divisor (GCD) of the two dimensions. The GCD of 42 and 72 is 6. Thus, the largest size of square tile that can be used is a 6-inch by 6-inch tile.
It is not clear from the question what "129 inches size" refers to. Is it one side of a tile, its perimeter, its diagonal?
They are in a ratio 1 to 3 and so the width of the red tile is 20.25 inches
Each side is 8 inches.
Depends on the size of a tile...
it depends on the size…but normally it would cost like 96¢ for a tile that would be the size of a 4 by 4 tile.
Calculating how many tiles in a room· 12"X12" is DUH 144 sq inches & 1 sq foot· so multiply any tile size by its 2 dimensions ie 12X12 or 16X16 & that = the sq ft per tile.· 13"X13" is 169 sq inches divided by 144 sq inches in a sq foot =1.174 per tile· 18"X18" is 324 sq inches per tile divided by 144 sq inches per sq ft= 2.25 sq ft per tile· 20"x20" tiles are 2.778 per tile· 24X24 tiles are 4 sq ft per tileFormula would look like this(Tile L"x W"= sq inches)divided by 144 sq inches=sq ft per tile) room area divided by sq ft per tile= how many tilesSoooo once you know the sq feet you need, add a little for waste & breakage & ooops cuts & you will have enough..