A tape measure.
which measurement device is used tot take the circumference of the body
The equation used to calculate circumference is C = Pi * R^2, where R is the radius and C is the circumference. If one knows the circumference and seeks the radius, then they must divide by pi. Next, they must take the square root. When the circumference is 72, the radius must be approximately 4.8.
Divide the circumference by pi, and that will give you the diameter. Then take half of the diameter (the radius), and plug it into the formula for the area of a circle (A=πr²)
Multiply by 2xpi (that is, by about 44/7) to get 352.75 To find the circumference of an object, you take it's diameter and multiply it by pi. If we take an approximate pi (3.14), and multiply it by the diameter (which is 56.12 multiplied by 2, or 112.24), we get the formula: C=pi(d) C=3.14(112.24) C=352.4336 Therefore, the circumference of the table is about 352.4336 units
Circumference = pi*d A very rough estimate would be to take pi = 3 and d = 16 giving 48 cm A more precise answer would be pi = 3.14, d = 16.3 and circumference = 51.182 cm or 51.2 cm to 1 dp Taking a still more accurate value of pi gives the circumference of 51.21 cm, still 51.2 cm when rounded to 1 dp.
which measurement device is used tot take the circumference of the body
A tape measure.
Take a tape measure or a measuring wheel and run it around the border of the pool.
measuring heat..."thermo" as in "thermal" means heat, and a meter is a measuring device...so a thermo-meter or a thermometer is a device that measures heat.
One cup equals 8 ounces. So if you have a measuring device that will measure 3 ounces, it will take 2 and 2/3 of those to reach one cup. If you want to have two cups it will take 5 and 1/3 of your measuring device. Three cups will require 8 of your measuring device at three ounces.
Prosthesis/prosthetic
Abduction
Yes. Measuring resistance involves imposing a small current through a device and measuring the voltage drop. If there were any other source of voltage, the reading would be in error. You could also damage the ohmmeter if there were an external voltage source. You should also take the device out of circuit before measuring it, so as to not bias the results by the resistance of other devices in the circuit. It all depends on the situation, for which you are responsible for evaluating before you start.
because it is difficult to meausure from scale.
A laboratory thermometer is a device for measuring temperature ranges. It can take the form of a manual (mercury or alcohol) or electronic (digtal).
You have to take away sun's circumference to jupiter's circumference. sun's circumference is 4,239,000 and jupiter's circumference is 449.020.
most people by measuring the amount of CO2 (carbon dioxide) in your bloodstream. if you have COPD then the body checks on the amount of oxygen in the bloodstream