The perimeter which is 2*(L+W) where L = length = 46 ft and W = width = 34 ft So 2*(46+34) ft = 2*80 ft = 160 ft
3 ft = 1 yd 34 ÷ 3 = 11 r 1 → 34 = 11×3 + 1 34 ft = (11×3 + 1) ft = 11 × 3 ft + 1 ft = 11 yd 1 ft
There need not be any as an area can have any shape; for example 4000 sq ft can be a rectangle with side lengths 1 ft and 4000 ft - as this rectangle has a width of 1 ft a 10 ft by 10 ft area cannot be extracted from it. However, if you are asking how many sections with the same area as a square of sides 10 ft can be made in an area of 4000 sq ft, then: 4000 sq ft ÷ (10 ft × 10 ft) = 4000 sq ft ÷ 100 sq ft = 40.
A measure of area in the old system of measurement. It is the area equivalent to the area of a shape that is square and one foot (30 cm) on all sides
A perimeter is not enough to determine the area. A 4000 ft perimeter could be a circular shape with radius giving an area of 1,273,000 sq ft (approx) = 29.23 acres. It could be a 1000 ft * 1000 ft square with an area of 1,000,000 sq ft = 22.96 acres or a 500 ft * 1500 ft rectangle with an area of 750,000 sq ft = 17.22 acres or a 100 ft * 1900 ft rectangle with an area of 190,000 sq ft = 4.36 acres or a 10 ft * 1990 ft rectangle with an area of 19,900 sq ft = 0.46 acres or a 1 ft * 1999 ft rectangle with a n area of 1,999 sq ft = 0.05 acres or a 0.1 ft * 1999.9 ft etc. As you might guess from the above, by reducing one dimension the area of the parcel of land can be reduced without limit although the perimeter is left unchanged.
A a square with s = 8.5 m. B a rectangle with l= 15 f,w=2 ft. C a square with a =16 ft. D a rectangle with l=17 ft,wThe correct shapes that satisfies an area of 34 square feetAn area would be measured in square feet (or some equivalent measure) but not in feet. Therefore, there can be no such shape.
👍 Correct answer to the question Felicia has a garden in the shape of a parallelogram as shown. What is the area of her garden? 72 ft² 75 ft² 92 ft² 96 ft²
There are 34 ft in 34 ft. But 34 ft in inches is equal to 408 inches.34 ft * 12 inches/1 ft = 408 inches
To find the area of a rectangle, you multiply the width by the length. In this case, the area would be 34 ft x 10 ft = 340 square feet. The perimeter of a rectangle is found by adding up all the sides, which in this case would be 2(34 ft) + 2(10 ft) = 68 ft + 20 ft = 88 feet.
The perimeter which is 2*(L+W) where L = length = 46 ft and W = width = 34 ft So 2*(46+34) ft = 2*80 ft = 160 ft
The area CANNOT be 20 ft since that is a measure of distance, not of an area. Assuming you meant 20 SQUARE feet, if the shape was a triangle, then 5 ft. if the shape was a rectangle, then 2.5 ft.
The area of a shape is not sufficient information.It does not even tell you what the shape is so the answer is that the shape must be at least 8.37 feet (approx) in its longest dimension. That length is attained if the shape is circular. If it is rectangular it can be55 ft long (and 1 ft wide), or550 ft long (and 0.1 ft wide), or5500 ft long and 0.01 ft wide etc.The area of a shape is not sufficient information.It does not even tell you what the shape is so the answer is that the shape must be at least 8.37 feet (approx) in its longest dimension. That length is attained if the shape is circular. If it is rectangular it can be55 ft long (and 1 ft wide), or550 ft long (and 0.1 ft wide), or5500 ft long and 0.01 ft wide etc.The area of a shape is not sufficient information.It does not even tell you what the shape is so the answer is that the shape must be at least 8.37 feet (approx) in its longest dimension. That length is attained if the shape is circular. If it is rectangular it can be55 ft long (and 1 ft wide), or550 ft long (and 0.1 ft wide), or5500 ft long and 0.01 ft wide etc.The area of a shape is not sufficient information.It does not even tell you what the shape is so the answer is that the shape must be at least 8.37 feet (approx) in its longest dimension. That length is attained if the shape is circular. If it is rectangular it can be55 ft long (and 1 ft wide), or550 ft long (and 0.1 ft wide), or5500 ft long and 0.01 ft wide etc.
A circular shape with an area of 125 sq ft has a radius of 6.31 ft (approx).
It is not possible to answer this question because information about area is not sufficient to identify the shape, let alone the dimensions of the shape. 30 acres could be in the form of a rectangle, a circle, a triangle or any other regular or irregular shape. Even if you restrict the shape to a rectangle, there are infinitely many rectangles whose area will be 30 acres. For example: 1 ft * 1306800 ft 2 ft * 653400 ft 3 ft * 435600 ft etc or 0.1 ft * 13068000 ft 0.2 ft * 6534000 ft etc and then you can have irrational lengths.
Divide the diameter by 2 to get the radius. Then use the standard formula for the area of a circle.
Assuming the shape is a triangle, the area is 11.40 sq ft, approx.
The area is 212.1 square feet.