surf board
375kg/m3
A "board foot" is 1 inch thick, 12 inches wide, 12 inches long. A 12 ft 2x4 would be 8 board ft- 1/3 the width, but 2X the thickness.
No they are differant units of measurement. Board feet, is actually a measurement of volume. 1 board foot is the volume of a board 12" wide by 1" thick by 1 foot long. So to calculate board foot you would also need to know the thickness. Whereas linear feet is a measurement of length, equal to 12 inches, in this case. You can also have linear inches, yards, furlongs, etc.
The antonyms for thick are:dilutedloosethinwatery
surf board
A long piece of wood is often referred to as a "plank" or a "board."
a board made of different matirials r u thick no offense
You can make an extension board by finding FR4-PCB that is about 1.6 mm thick.
plank
a cool climate because of their thick coats
Airplanes can handle more turbulence than you can ever imagin. They can handle up to more than 2,000 times of turbulence before their wings can snap off into pieces. Airplanes are over-built with extremely thick and strong illuminum skin and titanium skin. They are also made out of very thick and strong steel making it almost impossible for turbulence to break airplanes into pieces so you are very safe to fly on-board airplanes! Airplanes are over-built with more than 5 layers of thick and strong illuminum skin, titanium skin and steel!
we prefer woolen cloths in winter bcoz it is so thick and keeps our body warm
It depends on the density of the material you are using
Today's hikers prefer a shoe that is six inches high, is made of leather, and thick sturdy composition soles.
A board foot is 12 inches by 12 inches by 1 inch thick. A board 6 inches wide, 24 inches long and 1 inch thick is still 1 board foot. Any combination of the three measurements that add up to the first, 12x12x1 is considered 1 board foot.
This blender has a 1.5 horsepower heavy duty motor it should be able to handle a very thick mix.