0
surf board
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
If a 3-kg pine board is 20 cm wide 2 cm thick and 2 m long Then the density of the board is what?
375kg/m3
How many board feet are in a 2x4 12 ft long?
A "board foot" is 1 inch thick, 12 inches wide, 12 inches long. A 12 ft 2x4 would be 8 board ft- 1/3 the width, but 2X the thickness.
Why do you prefer a board and thick handle for your suitcase?
I don't. I would not swap my suitcase for a board and thick handle!
Are board feet and linear feet answers the same?
No they are differant units of measurement. Board feet, is actually a measurement of volume. 1 board foot is the volume of a board 12" wide by 1" thick by 1 foot long. So to calculate board foot you would also need to know the thickness. Whereas linear feet is a measurement of length, equal to 12 inches, in this case. You can also have linear inches, yards, furlongs, etc.
How wide is a 2x6 board?
5.50 Inches Wide
If a 3-kg pine board is 20 cm wide 2 cm thick and 2 m long Then the density of the board is what?
375kg/m3
What is foot board?
A piece of wood 1" thick by 12" wide by 1' long, or the equivalent volume. The width and thickness are often planed down some. So, let's say you have a 6" wide board 2' long and 1" thick. That is 1 board foot. Or, let' s say you have a 6" wide hunk of lumber 2" thick and 1' long. That is 1 board foot. Or, to get out of the box, here, say you have a 4" by 4" hunk of lumber that is 0.75 feet long (9") long. That is 1 board foot. In other words, if you multiply the width in inches by the thickness in inches by the length in feet, you have the number of board feet.
How many board feet in a piece of wood 2inches thick by 4 inches wide by 8 feet long?
5 1/3 Board Feet.
64mm long, 38mm wide and 14mm thick?
64mm long, 38mm wide and 14mm thick
Lumber bd ft conversion?
According to F.W. Honerkamp Co. Inc., the aswer is as follows: The unit of measurement for hardwood lumber (bd.ft. or BF). A board foot is the amount of lumber in a board one foot long, one foot wide, and one inch thick before milling. The formula for determining the board feet in a board is: (Width in inchesx length in feet x thickness in inches) / 12 = BFFor example:a board 8" wide, 12' long and 1" thick would contain 8 board feet.(8" wide x 12' long x 1" thick) / 12= 8 board feet.
What is the difference between board feet and lineal feet?
lineal is the length board feet is 1ft wide X 1 ft long X 1 inch thick = 1 board foot
How long is a board foot?
The board-foot is a specialized unit of volume for measuring lumber in the United States and Canada. It is the volume of a one foot length of a board one foot wide and one inch thick.
How big is a board foot?
A board foot is 12 inches by 12 inches by 1 inch thick. A board 6 inches wide, 24 inches long and 1 inch thick is still 1 board foot. Any combination of the three measurements that add up to the first, 12x12x1 is considered 1 board foot.
How many board feet are in a 2x4 12 ft long?
A "board foot" is 1 inch thick, 12 inches wide, 12 inches long. A 12 ft 2x4 would be 8 board ft- 1/3 the width, but 2X the thickness.
What is the total number of board feet in two pieces of 1 in?
1 board foot is a board that is 1 foot long, 1 foot wide and 1 inch thick, so since you did not give length and with of the boards there is no way to answer your question.
What do you call long piece of wood?
It is Steel( it was in my homework)
How is cubic board feet in timber converted into linear board feet in timber?
Cubic board feet is not a term used in the lumber industry, but it's obvious that a cubic foot is a cube that is one foot on an edge. A board foot, which is a common term used in the lumber industry is a piece of wood that is twelve inches wide, one inch thick and one foot long. Ten board feet would be a board one inch thick, twelve inches wide and ten feet long. (And no, a board doesn't have to be 12 inches wide. If it's 6 inches wide and 2 inches thick and one foot long, there is still one board foot of material there.) To make a cubic foot of wood, one might take one board foot of wood (12"x12"x1") and put it down, then stack another eleven pieces just like it on top the first one. That's 12 pieces of wood that are 1" thick for a total of 12" in height, and which are 12"x12" (length and width) giving us a volume of wood that is 12"x12"x12" or one cubic foot.
