0
What else can I help you with?
Which weights more 1 cubic yard top soil or 1 ton top soil?
A cubic yard of topsoil, if compacted to get the air pockets out will weigh more than 1 tone. If the topsoil is loose, a cubic yard of it could weigh about 1 ton. A lot depends on the topsoil, and whether it has more stone dust or less in it. The more moist the topsoil is, the more likely it will weigh more than a ton.
How much does 1 cubic yard of comopost wei?
1 cubic yard of the farm compost weighs approximately 1 ton.
How many tons is 2944 cubic yards of yard waste?
It depends what kind of waste it is. A cubic yard of soil is aprox. 1 ton.
Cubic yard to tons?
None, since there can be no conversion.A ton is a measure of mass. A cubic yard is a measure of volume. The two measure different things and, according to basic principles of dimensional analysis, conversion from one to the other is not valid.
How do you convert 1 cubic yard to 1 ton?
mass = volume x density So multiply the 1 cubic yard of the substance by the density (expressed in tons per cubic yard) of the substance.
How many tons are in a cubic yard?
Insufficient data to answer, a cubic yard is a measure of volume (3feet x 3feet x 3feet); whereas a ton is a measure of mass/weight (2000 pounds). Different materials have different weights. A "yard" of feathers will weigh a lot less than a "yard" of mud. A cubic yard in shiping is counted as a ton.
How many yards in a ton of coco coir or peat?
Technically, there are no cubic feet in a "yard". But the word "yard" is often used to mean "cubic yard", as in concrete, peat moss, gravel, topsoil, etc. 1 cubic yard = 27 cubic feet.
1 yard of topsoil covers how many cubic feet of land?
There are 764.554858 liters in a cubic yard of topsoil (or anything else).
How many tons of road salt in a cubic yard?
No where near 1 ton.
How do you convert 3000 pounds per cubic yard to tons per cubic yard?
This is not a valid conversion. Cubic units is a measure of volume while square units is a measure of area. Generally, volume is determined by multiplying length x width x depth. Area is normally determined by multiplying length x width.
How do you calculate the amount of sand needed to cover 100 square feet 2 inches deep?
Sand is usually sold by the ton so if you find the amount needed by 100 x 1/6 this will give you your cubic foot total. Then you will divide by 27 which is the number of cubic feet in a cubic yard. You should have 16 cubic feet at these measurements. 16 divided by 27 is .59 or a little over half a cubic yard. There are 22 cubic feet of sand per ton so 1 ton of sand should do it. So if the sand in your area is sold by the ton then get 1 ton. If it sold by the yard get 3/4 yard if you can. Hope this helps.
How many yards in half a ton?
All depends on the product. 1 cubic yard of screened top soil equals 1 ton. Of screened gravel, 1 yard equals 2 tons. 3 to 6 inch rock, one yard is 1.5 tons. Crushed Limestone 1 yard equals 2 tons
