Cubic yard is a measure of volume. Ton is a measure of weight. How many cubic yards in a ton is going to depend entirely upon the item in question. A ton of feathers will have many more cubic yards than a ton of gravel or dirt.
If you want to apply the density yourself, it's easiest to convert all to the metric. Ton means short ton in the figures below. This equates to 907.2 kilos. 1 cubic yard is 0.764555 metres cubed, which equals 764.555 litres. These should help in applying a density that you may find.
Having said that, here are some yards per ton conversion for materials you might care about:
1 cubic metre of pure water at the temperature of maximum density (3.98 °C) and standard atmospheric pressure (101.325 kPa) has a mass of 1000 kg, or 1 tonne. So your question can only mean you need the weight of pure water. 1 cubic meter is 1.307950619 cubic yards. So, 1.307950619 cubic yards of fresh water weigh 1 tonne. Forget syrup or oil. For that calculation you need the specific weight of that material.
The conversion rate between cubic yards and tons varies depending on the material being measured. For example, one ton of gravel typically equates to about 0.55 cubic yards, whereas one ton of topsoil is roughly equivalent to 0.75 cubic yards. It's important to check specific conversion rates for the material in question.
5 cubic feet
There are approximately 1.2 cubic yards in a ton of item 4, but this can vary slightly depending on the density of the material and how tightly it is packed.
A university extension website would tend to be an authoritative, respected source of information. The Sanpete Cooperative Extension in Ephraim, Utah, links 60,000 cubic yards of turkey litter with 24,700 tons. That would be about 2.43 [2.429121] yards.
1,000 lbs or 454 Kilograms
There are approximately 12 tons in 8 yards of dirt.
There is about 2800lbs in 2 yards of top soil.
5 cubic feet
Something on the order of .6 yards per US ton
There are approximately 1.2 cubic yards in a ton of item 4, but this can vary slightly depending on the density of the material and how tightly it is packed.
The rule of thumb for wood chips is that they weighs 550 pounds per cubic yard. So a ton of wood chips would equal about four cubic yards.
A university extension website would tend to be an authoritative, respected source of information. The Sanpete Cooperative Extension in Ephraim, Utah, links 60,000 cubic yards of turkey litter with 24,700 tons. That would be about 2.43 [2.429121] yards.
there is about 1.25 yards to a ton,so 22.5 tons would be approx 18 yards
It depends what kind of waste it is. A cubic yard of soil is aprox. 1 ton.
There is an average of 1.65 tons of flex base per cubic yard.
There are two 'types' of ton. An Imperial ton and a US ton An Imperial ton has 2,240 pounds A US ton has 2,000 pounds So, depending on where you are, 17 pounds is either 0.0075892857 Imperial tons, or 0.0085 US tons
1,000 lbs or 454 Kilograms
The amount of limestone in a ton varies depending on its density and composition. On average, one ton of crushed limestone typically contains around 1 to 1.5 cubic yards when compacted. It is recommended to check with the supplier for the specific measurements of the limestone being purchased.