0
What else can I help you with?
What are the answers to algebra with pizzazz worksheet 86?
The ratio of oil to vinegar in a certain salad dressing is 8 : 5. How much oil must be blended with 7 liter of vinegar for that recipe
What fraction in its simplest form is 150 ml to 1l?
It is 3/20.
Is there a platinum ratio if there is a golden ratio?
No. There is no platinum ratio.
What is the mass ratio of pennies to nickels?
The ratio is 1:2The ratio is 1:2The ratio is 1:2The ratio is 1:2
How many bags of cement per ton of sand?
The number of bags of cement needed per ton of sand depends on the specific mix ratio being used for concrete. A common mix ratio is 1 part cement to 2 parts sand to 4 parts gravel, which translates to about 0.5 tons of cement for every ton of sand. Therefore, if using 94-pound bags of cement, approximately 10 bags would be needed per ton of sand. However, it's essential to adjust the ratio based on the desired strength and application of the concrete.
The ratio of flour to sugar is 3to2 If 3 caps of sugar are used then how many cups of flour are needed?
4.5
What is the gas to oil ratio on a 2002 Yamaha blaster?
30 liters of gas to 1 liter of oil
I have 1 liter and need to add fuel additive at a ratio 237 ml per 151 liters. How much do I add per 1 liter?
1.569
What is the ratio of moles of solute to liters of solution called?
The ratio of moles of solute to liters of solution is called molarity. Molarity is expressed in moles per liter (mol/L) and is commonly used to quantify the concentration of a solute in a solution.
How much oil is added to 20 liters of gas at 50-1 ratio?
To calculate the amount of oil needed for a 50:1 ratio, you can divide the total volume of gas by 50. For 20 liters of gas, you would add 20 liters ÷ 50 = 0.4 liters of oil. Therefore, you should add 0.4 liters of oil to 20 liters of gas at a 50:1 ratio.
How much oil at 50-1 ratio do you put in a 20 liter tank?
To mix oil at a 50:1 ratio in a 20-liter tank, you need to determine the amount of oil required. For a 50:1 ratio, there is 1 part oil to 50 parts fuel, so you divide the total volume by 50. In this case, you would need 0.4 liters of oil (20 liters ÷ 50) to achieve the desired ratio.
How much oil in 5 litres for a 501 ratio?
To find the amount of oil needed for a 501 ratio in 5 liters of fuel, you divide the total volume by the ratio. In this case, 5 liters divided by 501 equals approximately 0.00998 liters of oil, which is about 10 milliliters. Thus, you would need roughly 10 milliliters of oil for 5 liters of fuel to achieve a 501 ratio.
Ratio for lining paste?
The ratio for making lining paste for cooking is typically 1 part flour to 1 part water. Mix the flour and water together until a thick paste forms, then use it as needed in your recipe. Adjust the ratio if necessary to achieve the desired consistency.
What is the proper oil ratio for a 1991 85 hp Yamaha two stroke outboard?
The correct ratio for 1991 85hp Yamaha is 1:50. 1 liter of oil for 50 liters of fuel.
What ratio of hydrated lime copper sulphate is needed to make 15 liters of solution?
Depending on the desired concentration of the solution !
What is the ratio of fat for flour?
The ratio differs from recipe to recipe.
How much 2 stroke do you mix with 5 liter of petrol if the mix ratio is 25 to 1?
it would be 200ml of 2 stroke oil for 5 liters of gas
