0
Verified answer
If five devices arranged in a mesh topology so we will have 10 links and 4 I/O ports in each hardware device. If any link goes down from them so it will be easy to find out which one is down and it won't effect on other links. But a bulk of wires and can create problem in re-installation and re-configuration.
Oh, dude, if one connection fails in a mesh network with five devices, it's like the other devices can just find another route to communicate. It's not like they're gonna throw a fit and stop working altogether. So, like, the consequences are pretty minimal, just a little inconvenience while they figure out a new path.
Well, darling, if a connection fails in a mesh topology with five devices, you better buckle up for some redundancy. The good news is, each device is connected to multiple others, so the network can still function even if one connection goes kaput. The bad news? If more than one connection fails, you might have a bigger mess on your hands than a cat in a yarn factory.
In a mesh network, each device is connected to every other device, providing redundancy and fault tolerance. If a connection fails between two devices in a mesh network, the other devices can still communicate through alternative paths. However, if multiple connections fail simultaneously, it can lead to isolated devices and potential network fragmentation. It is crucial to have robust network monitoring and management in place to quickly identify and resolve connection failures in a mesh network.
The consequences if a connection fails Five devices arranged in a mesh topology?
The consequences if a connection fails Five devices arranged in a star topology (not counting the hub)
Which topology are all devices connected to one another in a closed loop?
An old topology called Token Ring
Which LAN topology is characterized by all devices being daisy-chained together with the devices at each end being connected to only 1 other device?
Bus technology. which uses coax wire and terminators.
What is network tropologies?
A network topology is a description of the way computers are connected to each other and to other devices on a network. It can refer to the physical connections (the way the wires interconnect or the routing of wireless signals) or it can refer to the logical connections (the way computers can see each other or not see each other even though they have a physical connection. The topology can refer to a home network with a handful of computers and printers or it can extend to vast sections of the Internet. Some examples of topologies are ring, bus, tree, mesh and each describes the way the links are made. Network topology is a huge topic and the subject of more books than can be counted. A link is below that offers some simple examples of topolgy and might be a springboard for more study.
What are some disadvantages of labor saving devices?
Advantage and disadvantage of labour saving devices
What is the Computer highway system?
You are probably referring to the Internet; the information superhighway. The Internet allows you to access any Internet resource that is visible to your connection, no matter where in the world it is located, or how it is connected. It is a vast resource that encompasses billions of individual devices.
Five devices arranged in a mesh topology?
gdfbjggfegfgafbjyegbahfyugfjhafb
What is the definition of networking topology?
Topology refers to the physical method of wiring the devices to each other, what kind of connection devices are used, etc.
Which topology are all devices connected to one another in a closed loop?
An old topology called Token Ring
What are consequences if connection fails in 5 devices arrange in a star topology?
Bus runs in a straight line from one network device to another. So if one gets disconnect then the all the devices connected down the line get disconnect. Star runs to a central device like a switch, so if the switch itself fails then the whole network will be disconnected. Ring is like a bus except it connects back onto itself. So if one device fails they all fail. The exception is if there is a redundant inside ring like that used in FDDI (fiber ring) then if both get disconnect from one device then they all do. Mesh is high redundancy. Only one device would be disconnected if all the connections were to fail for that device. You can have many connections to other devices thats why its less likely to fail. The only cause for failure at this point is really the power and if you just don't have any. Even if one of the connections between two devices fail there is no effect on network and they can still communicate through other channels
What is the difference between technology and topology?
Topology is the actual layout of the network, for instance, where the routers and other devices are located. That would be the networks topology.
What is the arrangement of computer on the network?
The arrangement of computers on a network is called topology. It describes how the individual computers are connected to each other and to the network.examples of topology are Star topology, ring topology, mesh topology, bus topology.
At a minimum a network topology diagram will include which components?
Connections between devices Devices
Deine the topology and explain the advantage and disadantage of bus star and ring topology?
Topology is the structure that describes how devices in a Network are connected.Bus Topology: Directly connects all devices to network i.e utilises a single Physical medium for Data transmission between devices.Star Topology: Connects all devices in network through a Central Network connecting device such as Hubs & Switches.Advantage of Bus Topology is that less connecting cable is used.Advantage of Star Topology is that Network can function in case one or more devices fail.Disadvantage of Bus Topology is that whole Network goes down if one device fails.Disadvantage of Star Topology is that it requires physical connecting medium from Central device to the connecting device i.e more expensive.
What type of topology used in schools?
In schools, a common networking topology used is a star topology. This setup involves connecting individual devices to a central switch or hub, facilitating efficient communication between devices. This topology offers ease of connectivity and centralized management, making it suitable for educational environments.
What topology connects each devices to a neighboring device?
Ring
What topology can only have a maximum of 20 devices connected to it?
it is the bus
Why bus topology cost is very less?
Bus topology, as compared to a star topology costs less because less cabling is required to connect multiple devices together.
