The area of 15 feet times 15 feet = 225 square feet.
255 square feet
270
215
Square footage estimates on drywall are based on the square footage of wall and ceiling that need to be covered.
156 square feet. (just multiply the two)
Add the length of each wall to get the total perimeter of the room. In this case 10+10+10+10=40. Then multiply the40 by the height of the room. In this case 8. The answer 40*8=320 is the square feet of the walls in the room.
When you say "square footage", that usually means the area of the floor, and yes, you get that by multiplying (length of the room) x (width of the room). That tells you how much carpet you need for the floor. The walls and the ceiling also have their own "square footage". You have to know that to do things like paint and wallpaper. The ceiling has the same area as the floor. But for the walls, you have to do another whole different calculation. The easy formula for square footage of the walls is circumference (the distance around the room at the floor level) X the height of the wall (at the tallest point if the walls are uneven or have a peak). If the walls have a large number of windows, doors or other areas not to be painted, you may want to figure the rough square footage of these (estimate low, better to have a bit too much paint than a bit too little) and subtract that from your total. If you are estimating square footage for paint remember you may want to do two coats. If you are estimating for wallpaper, be sure to allow for the "pattern repeat".
The square footage of an apartment will usually include bathroom space. When room size is used, closets are not included. When apartment size is figured, the perimeter is measured and these could be included.
No it does not...
To calculate square footage, you multiply the length by the width of the room. So, if the room measures 10 ft. by 18 ft., your total area is 180 sq. ft.
To find the square footage you should multiply the length and width of each room, and add up the results to give you the total square feet.
what is the square footage
It's a total of 110 square feet (or you can write it as 110 ft2) Simply multiply the two dimensions together to get the square footage.
In order to get the square footage you need to take 13' times 15' and you will get the square footage
In order to calculate the square footage you need to find the length and the width of the room in feet. You multiply the length and the width to give you the square footage of the room
Read your own question! The square footage is 20!
To find the square footage of a room, you simply multiply the length of the room (in feet) by the width of the room (in feet). The answer is the square footage of the room (assuming the sides opposite each or are equal in length)
It depends on the room.
To figure out the square footage of this odd sized room, you simply need to multiply the numbers. The answer is 2720 square feet.
The square footage of the room is determined by the floor dimensions. So if you have a 12 x 20 room the square footage is 240 square feet.