0
How do you interpret if this is the data SD of 15.79 and mean of 126.9 or SD of 8.29 and mean of 124.7 also How do you know if the standard deviation is high and is there a highest possible SD?
Wiki User
∙ 14y ago
n probability theory and statistics, thestandard deviation of a statistical population, a data set, or a probability distribution is the square root of itsvariance. Standard deviation is a widely used measure of the variability ordispersion, being algebraically more tractable though practically less robustthan the expected deviation or average absolute deviation.
It shows how much variation there is from the "average" (mean). A low standard deviation indicates that the data points tend to be very close to the mean, whereas high standard deviation indicates that the data are spread out over a large range of values.
For example, the average height for adult men in the United States is about 70 inches (178 cm), with a standard deviation of around 3 in (8 cm). This means that most men (about 68 percent, assuming a normal distribution) have a height within 3 in (8 cm) of the mean (67-73 in (170-185 cm)) - one standard deviation, whereas almost all men (about 95%) have a height within 6 in (15 cm) of the mean (64-76 in (163-193 cm)) - 2 standard deviations. If the standard deviation were zero, then all men would be exactly 70 in (178 cm) high. If the standard deviation were 20 in (51 cm), then men would have much more variable heights, with a typical range of about 50 to 90 in (127 to 229 cm). Three standard deviations account for 99.7% of the sample population being studied, assuming the distribution is normal (bell-shaped).
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
How do you find highest standard deviation in given number?
Standard deviations are measures of data distributions. Therefore, a single number cannot have meaningful standard deviation.
What is the relationship between the mean and standard deviation in statistics?
The 'standard deviation' in statistics or probability is a measure of how spread out the numbers are. It mathematical terms, it is the square root of the mean of the squared deviations of all the numbers in the data set from the mean of that set. It is approximately equal to the average deviation from the mean. If you have a set of values with low standard deviation, it means that in general, most of the values are close to the mean. A high standard deviation means that the values in general, differ a lot from the mean. The variance is the standard deviation squared. That is to say, the standard deviation is the square root of the variance. To calculate the variance, we simply take each number in the set and subtract it from the mean. Next square that value and do the same for each number in the set. Lastly, take the mean of all the squares. The mean of the squared deviation from the mean is the variance. The square root of the variance is the standard deviation. If you take the following data series for example, the mean for all of them is '3'. 3, 3, 3, 3, 3, 3 all the values are 3, they're the same as the mean. The standard deviation is zero. This is because the difference from the mean is zero in each case, and after squaring and then taking the mean, the variance is zero. Last, the square root of zero is zero so the standard deviation is zero. Of note is that since you are squaring the deviations from the mean, the variance and hence the standard deviation can never be negative. 1, 3, 3, 3, 3, 5 - most of the values are the same as the mean. This has a low standard deviation. In this case, the standard deviation is very small since most of the difference from the mean are small. 1, 1, 1, 5, 5, 5 - all the values are two higher or two lower than the mean. This series has the highest standard deviation.
What can be said about a set of data when its standard deviation is small but not zero?
This means that the set of data is clustered really close to the mean/average. Your data set likely has a small range (highest value - lowest value). In other words, if the average is 6.3, and the standard deviation is 0.7, this means that each individual piece of data, on average, is different from the mean by 0.7. Each piece of data deviates from the mean by an average (standard) of 0.7; hence standard deviation! By definition, 66% of all data is 1 standard deviation from the mean, so 66% of the data in this example would be between the values of 5.6 and 7.0.
What are the four measures of central tendency?
The four measures of central tendency are mean-also called average, mode-the most frequently occurring numerical, median-the middle number after arranging all data from lowest to highest numerical and lastly standard deviation-root-mean-square or square-root of the variance. These are the 4 measure of central tendency.
What is the highest card number in standard deck of cards?
The highest number card in a standard deck of cards is the number ten. Some games use the picture cards to represent values higher than ten but there are no numbers on these cards.
How do you find highest standard deviation in given number?
Standard deviations are measures of data distributions. Therefore, a single number cannot have meaningful standard deviation.
What is the relationship between the mean and standard deviation in statistics?
The 'standard deviation' in statistics or probability is a measure of how spread out the numbers are. It mathematical terms, it is the square root of the mean of the squared deviations of all the numbers in the data set from the mean of that set. It is approximately equal to the average deviation from the mean. If you have a set of values with low standard deviation, it means that in general, most of the values are close to the mean. A high standard deviation means that the values in general, differ a lot from the mean. The variance is the standard deviation squared. That is to say, the standard deviation is the square root of the variance. To calculate the variance, we simply take each number in the set and subtract it from the mean. Next square that value and do the same for each number in the set. Lastly, take the mean of all the squares. The mean of the squared deviation from the mean is the variance. The square root of the variance is the standard deviation. If you take the following data series for example, the mean for all of them is '3'. 3, 3, 3, 3, 3, 3 all the values are 3, they're the same as the mean. The standard deviation is zero. This is because the difference from the mean is zero in each case, and after squaring and then taking the mean, the variance is zero. Last, the square root of zero is zero so the standard deviation is zero. Of note is that since you are squaring the deviations from the mean, the variance and hence the standard deviation can never be negative. 1, 3, 3, 3, 3, 5 - most of the values are the same as the mean. This has a low standard deviation. In this case, the standard deviation is very small since most of the difference from the mean are small. 1, 1, 1, 5, 5, 5 - all the values are two higher or two lower than the mean. This series has the highest standard deviation.
What is the highest possible number used in bingo?
Standard bingo games use O 75 as the highest number
What can be said about a set of data when its standard deviation is small but not zero?
This means that the set of data is clustered really close to the mean/average. Your data set likely has a small range (highest value - lowest value). In other words, if the average is 6.3, and the standard deviation is 0.7, this means that each individual piece of data, on average, is different from the mean by 0.7. Each piece of data deviates from the mean by an average (standard) of 0.7; hence standard deviation! By definition, 66% of all data is 1 standard deviation from the mean, so 66% of the data in this example would be between the values of 5.6 and 7.0.
Can the five-number summary be used to calculate the standard deviation?
No. To calculate a sample standard deviation one requires the sample values. The five-number summary provides only the lowest value, the highest, the median, and the upper and lower quartiles. In any sample of size greater than five some values will be missing from the summary.
Does a royal flush beat four of a kind?
Yes a Royal Flush is the highest possible standard poker hand you can get.
Where is the highest standard of living in the Europe?
The highest standard of living in Europe is MonacoImproved : Norway has the highest standard of living in Europe and the World... If Ranked by the UN.. Monaco would have the 23rd highest living standard in the world.
What is quartiles?
The quartile deviation(QD) is half the difference between the highest and lower quartile in a distribution.
Is Swedens standard of living one of the highest in the world?
No, but very close! Norway has the highest standard of living in the world. Sweden has the 7th highest.
What is the best Pokemon there is?
Arceus has the highest total of all stats out of all five regions. Blissey has the highest possible HP. Deoxys (Attack Forme) has the highest possible attack. Shuckle has the highest possible defence. Deoxys (Speed Forme) has the highest possible speed. Deoxys (Attack Forme) has the highest possible special attack. Shuckle has the highest possible special defence.
What is the highest beacon score possible?
850 is the highest beacon score possible.
Why is it important to test out possible improvements to your work?
t is important to test out all possible improvements to make sure the method you choose to conduct the task in hand is the best and most appropriate, thus work will be kept to the highest possible standard.
