0
What else can I help you with?
What is a elbow of a pipe?
Generally it is a 90 degree fitting Some non knowing also call a 45 deg an ell as a 11 1/4 221/2 60 deg etc
What is principle sine function?
It is sine defined between -pi/2 and + pi/2 radians (-90 deg and +90 deg) and its inverse is defined over this range.
What is an equivalent of 90 degrees F in Celsius degrees?
Conversion: 90°F → (90 - 32) × 5/9 °C = 32 2/9 °C ≈ 32.22°C
What kind of conduit does a 880 greenlee pipe bender bend emt or rigid?
A 770 Greenlee hydraulic pipe bender bend is used for rigid steel conduit from 2" to 4".
Right angle is how many deg?
90 degrees. 1/2 pi radians.
What are the angles of rotation of a 20 gon?
Some 20-gons will have only one: 360 degrees. Some 20-gons will have 2 (180 deg), some will have 90 deg, 72 deg, 36 deg of 18 deg. It depends on the extent of irregularity of the polygon.
What is the firing order of a 4 rotor rotary engine?
1-3-2-4 Rotors 1&2(which are 180deg apart) are phased 90 deg from rotors 3&4 (which are 180 deg apart). Imagine a pair of 2 rotor eccentric shafts front to back, but the rear shaft is 90 deg offset to the front shaft.
What are the ratios of the length of the longer leg of a 30-60-90 triangle to the length of its hypotenuse?
The longer leg is opposite the 60 deg angle. Suppose A = 60 deg, C = 90 deg and a and c are the corresponding sides. Then, by the sine rule a/c = sin(A)/sin(C) a/c = sin(60)/sin(90) = sqrt(3)/2
How to calculate dimension 90 degree bend in BBS?
To calculate the dimension of a 90-degree bend in a Bar Bending Schedule (BBS), you need to determine the bend radius and the length of the bent bar. The formula typically used is: Length of bend = (π/2) × Bend Radius + Straight Length before and after the bend. Ensure to account for the bar diameter when determining the bend radius, as it affects the overall length. Finally, sum these lengths to get the total dimension for the 90-degree bend.
What is take off measurement for 90 degree 8 inch pipe?
The take-off for a standard radius 90 is one and one half the diameter of the pipe. Example: 6 inch 90 has a take- off of 9 inches. The take-off for short radius 90 would be the dia. of the pipe. Long radius 90 is 2 times the pipe diameter.
What is 6D in bend pipe?
In the context of bend pipes, "6D" refers to the bend radius being six times the nominal diameter of the pipe. For example, if the pipe has a diameter of 2 inches, a 6D bend would have a radius of 12 inches. This specification is important for ensuring smooth flow and reducing turbulence in piping systems. It is commonly used in various engineering applications to maintain structural integrity and optimize fluid dynamics.
What is the formula for computing the surface area of a pipe elbow?
Calculate as you would the surface of a cylinder who's height is the length of the central line of the pipe bend.(2*π*r*h)where:r is the (external) radius of the pipeπ is the constant 3.14159... andh is the length of the cylinder or the center-line of the pipe bend
