What schedule pipe?
Maximum PSI rating is on the outside rating of the pipe
It should, are you sure your pvc pipe is round
Water flow rate half inch PVC pipe 65 psi?
The outer diameter of 1/2 inch PVC pipe is approximately 0.84 inches.
The outside diameter of a 1/2 inch PVC pipe is approximately 0.840 inches.
Probably the wrong size flange. Is the flange a toilet collar? If so the pipe is probably 4 inch.
this depends on the class of the pipe as the higher the class the thicker the pipe
The maximum pressure rating for a 2 inch schedule 80 PVC pipe is typically around 400 psi.
The maximum pressure rating for a 2 inch schedule 80 PVC pipe is typically around 400 psi.
The maximum weight capacity that can be supported by a 2 inch schedule 40 PVC pipe is approximately 250 pounds.
The best way to connect two sections of PVC pipe with a 2 inch PVC coupling is to first clean and dry the pipe ends, apply PVC primer and cement to the ends and inside the coupling, then quickly push the pipe ends into the coupling and hold them in place for a few seconds to allow the cement to bond.
The recommended installation procedure for schedule 80 4 inch PVC pipe involves cutting the pipe to the desired length, cleaning the ends with PVC cleaner, applying PVC primer, and then using PVC cement to join the pieces together. It is important to ensure the pipe is properly supported and aligned during installation to prevent leaks or damage.