50 feet = 15.24 meters.
All the angles in a triangle add up to 180 degrees. With the isoceles triangle, two of the angles must be the same, so you could have these three angles: 50, 50, 80. (50+50+80=180)
Cos of 850 degrees?850 deg = 130 + 360*2 = 130 degBy the graph of the cosine: cos(130) = -cos(50)and cos(50) is not a fraction of a root.cos(50) = 0.6427876...Therefore, cos(850) = -0.6427876...
a 100 foot run with a 50 foot rise would give you a 6/12 pitch
Sorry, but cos(50)sin(40) - cos(40)sin(50) is -0.1736, which is not even close to sin(90) which is 1.This does not work in radians, either. Please restate your question.
To convert the dimensions of a lot from feet to acres, you first need to calculate the total square footage by multiplying the length and width. In this case, 50 feet x 135 feet = 6,750 square feet. To convert square feet to acres, divide by 43,560 (the number of square feet in an acre). So, 6,750 square feet / 43,560 = 0.155 acres. Therefore, a lot measuring 50' x 135' is approximately 0.155 acres.
50' X 100' = 5,000 sq. ft. 5,000 sq. ft. = 0.114784 acres An acre is 43,560 square feet (sg. ft). 5,000 sq. ft. divided by 43,560 = 0.114784 acres. A handy website for conversions is OnlineConversions.com
A lot that is 50 feet wide by 500 feet long is equal to 0.57 acres. To calculate this, you multiply the length by the width (50 x 500 = 25,000 square feet) and then divide by the number of square feet in an acre (43,560 square feet).
50' X 100' = 5,000 sq. ft. 5,000 sq. ft. = 0.114784 acres An acre is 43,560 square feet (sg. ft). 5,000 sq. ft. divided by 43,560 = 0.114784 acres. A handy website for conversions is OnlineConversions.com
About 0.14 acres.
To convert the dimensions from feet to acres, the lot size will be 0.155 acres.
50
7,500 square feet is 0.17 acre.
50 acres is 2,178,000 square feet.
Answer: 50 acres = 0.202342 km²
There are 640 acres in a square mile. Hence, 50 acres = 0.078125 square miles
Well, darling, 50 meters x 50 meters is 2500 square meters. To convert that to acres, you divide by 4046.86 (because there are about 4046.86 square meters in an acre), which gives you roughly 0.62 acres. So, your 50 meters x 50 meters plot is about 0.62 acres of sassiness.