V = 141.37 m3
A round bath is a cylinder. The volume of a cylinder = area of the base x perpendicular height. Area of the base is πr2 (pi x radius x radius). The radius is half the diameter. The diameter is the width of the circular base. The perpendicular height will be the depth of the water, whether it's up to the top or up to where you have a bath.
The volume of the cylinder is found by multiplying the depth by the square of the radius and by 3.142. The radius of the beaker is thus 6.31 cubic meters.
Volume of water = (pi) x (Radius of the well)2 x (depth of the water)
The volume of a cylinder is the area of its base multiplied by the height. [In this case, the "height" of the cylinder is the depth of the pool.] The base of the pool is a circle with radius of 9 m. The area of a circle is the radius squared times pi, which in this case is 81*pi m^2. Multiply this by the depth of 3.5 and you get 283.5 * pi cubic meters.
To calculate the volume of a cylinder one must multiply the area of the circle by the depth of the cylinder. The volume of the cylinder described is 98.172 cubic feet.
The volume in liters of a cylinder with a diameter of 2000mm and a depth of 100mm is: 314 liters.
H = D sin ( ((2*pi*V.k)/V.t) - pi/2) + D Here: D = Diameter of the cylinder V.k = The known volume of the liquid V.t = The total volume of the cylinder H = The height of the liquid.
The volume of a cylinder (with a radius of r and a length L ) in the horizontal position filled to a depth (d) can be calculated with the following formula:L((r2)*(arcos((r-d)/r)) - (r-d)*sqrt(2rd-d2))Note: Calculator must be set to work in radians as opposed to degrees
Assuming 60 foot diameter ( 30 foot radius)>Volume (US gallons) = (pi * r * r * depth) / 0.1336805556 = 126,904.0>Volume (UK gallons) = (pi * r * r * depth) / 0.16054365324 = 105,669.7
Length X Width X Depth = volume
width times height times depth
Assuming the radius is an inside dimension: The inner surface area of the cylinder is Pi x R² = 3.1416 x (3 x 3) = 3.1416 x 9 = 28.2744 sq cm. The area is multiplied by the depth of the sand to find its volume. 28.2744 sq cm x 1 cm = 28.2744 cu cm.