0
It is not the potential voltage that will kill you it is the current that you conduct when you come into contact with the voltage. The following is the limits that the human body will take. One milliamp is one thousandth of an amp.
Milliamps are dangerous
Less than 1/2 milliamp no sensation
1/2 to 2 milliamps Threshold of perception
2 to 10 milliamps muscular contraction
5 to 25 milliamps painful shock (may not be able to let go)
Over 25 milliamps Could be violent muscular contraction
50 to 100 milliamps Ventricular fibrillation
over 100 paralysis of breathing.
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
Which wire is the neutral wire in a 110 volt system?
White.
What color is the return wire of 110 vac?
White is the neutral wire. Black is hot, green is ground.
On a 110V circut wire what is the voltage of the hot wire?
The voltage (AC RMS) between the "hot" wire and the "neutral" wire is 110 VAC (volts alternating current). But it should be noted that the "110" volts supplied to homes can range from 95 to 130 volts, with the present standard now being 120 VAC. In addition, if the circuits are wired in accordance to most local codes, the "neutral' wire is connected to the "ground" wire in the distribution (fuse or circuit breaker panel or box), so the 110 volts will also appear between the "hot" wire (black color coded wire) ,and the ground wire (bare wire, within an insulating jacket carrying the insulated "hot" and "neutral" wires). Note, however, that the "ground" wire is not designed nor intended to carry the "return" current from the "hot" wire, but only as a safety "ground" for currents due to shorted or improperly wired devices connected to the circuit.
Which wire is hot on 110?
Generally, if the electrician did it right, the BLACK wire is HOT, and the WHITE wire is NEUTRAL. Meaning that the white wire is the center tap of the main transformer, and the black wire(s) are either leg of the 240 volt output. Since the hot to center tap only takes half of the 240, it ends up being 120 volts at your outlet.
On a 110 voltage circuit where the white wire is common the black wire is normally?
The voltage potential supplying conductor.
Which wire is the neutral wire in a 110 volt system?
White.
How many wire pairs can a single 110 block terminate?
It depends on the type of 110 block.
Can you use 60 amp breaker for 110 V at 110 ft and what wire is best?
A breaker is based on wire size, as the breaker protects the wire and not the load. This is a voltage drop question. A #3 copper conductor will limit the voltage drop to 3% or less when supplying 60 amps for 110 feet on a 110 volt system.
What color is the return wire of 110 vac?
White is the neutral wire. Black is hot, green is ground.
On a 110V circut wire what is the voltage of the hot wire?
The voltage (AC RMS) between the "hot" wire and the "neutral" wire is 110 VAC (volts alternating current). But it should be noted that the "110" volts supplied to homes can range from 95 to 130 volts, with the present standard now being 120 VAC. In addition, if the circuits are wired in accordance to most local codes, the "neutral' wire is connected to the "ground" wire in the distribution (fuse or circuit breaker panel or box), so the 110 volts will also appear between the "hot" wire (black color coded wire) ,and the ground wire (bare wire, within an insulating jacket carrying the insulated "hot" and "neutral" wires). Note, however, that the "ground" wire is not designed nor intended to carry the "return" current from the "hot" wire, but only as a safety "ground" for currents due to shorted or improperly wired devices connected to the circuit.
Which wire is hot on 110?
Generally, if the electrician did it right, the BLACK wire is HOT, and the WHITE wire is NEUTRAL. Meaning that the white wire is the center tap of the main transformer, and the black wire(s) are either leg of the 240 volt output. Since the hot to center tap only takes half of the 240, it ends up being 120 volts at your outlet.
On a 110 voltage circuit where the white wire is common the black wire is normally?
The voltage potential supplying conductor.
What size wire for 25 amp 110 volt for 75 feet?
In the US and Canada, 10 Guage wire will suffice
How do you tap off existing unused 220 wire and convert it to 110 for a plug in?
Take out the double pole breaker, place the white wire on the grounding bar along with the ground wire, install singe pole breaker(size needed) attach black wire onto new breaker and you now have 110 line.
What is the minimum ground wire size for a 20 amp 110 volt circuit?
The ground wire in a two or three conductor #12 cable is a #14 bare ground wire.
How quickly should a peugeot 307hdi do 0-60mph?
My 05 hdi 110 has 90,000 on the clock and hits sixty in about 8.9 secs i was quite shocked
If 220 volt appliances consume half the power of 110 volt appliances why aren't refrigerators being sold in the USA with 220 volts?
True, 220 volt appliances consume less energy than 110 volt ones, but in order to use them in the US, you would need to convert them to 110 voltage. This is a less efficient use of energy. Plus, 220 volt appliances are a more risky because people can get seriously injured if they get shocked from them.
