not quite. some of the molecules fit between each other.
Here's a step-by-step solution: Fill up the 5-liter jar completely with water. Pour the water from the 5-liter jar into the 3-liter jar until the 3-liter jar is full. Now, you are left with 2 liters of water in the 5-liter jar. Empty the 3-liter jar. Pour the 2 liters of water from the 5-liter jar into the 3-liter jar. Fill up the 5-liter jar again. Pour enough water from the 5-liter jar into the 3-liter jar to fill it completely (this will take 1 liter). Now, you are left with 4 liters of water in the 5-liter jar, which gives you the required 8 liters of water.
9
Fill a container three times using the 7-liter jar (which will give you 21 liters), then take out water with the 11-liter jar (which will give you 10 liters).
684 ml
4.84
30 liters of a 10 % solution of fertilizer has .1(30) = 3 liters of fertilizer 1 liter of 30% solution has .3 liter of fertilizer 10 liters of 30% solution has 3 liters of fertilizer so, the chemist needs 10 liters of the 30% solution and 20 liters of water to make 30 liters of a 10% solution.
It would take 100,000 liters of water to dilute 1 liter of copper chlorine solution.
Here's a step-by-step solution: Fill up the 5-liter jar completely with water. Pour the water from the 5-liter jar into the 3-liter jar until the 3-liter jar is full. Now, you are left with 2 liters of water in the 5-liter jar. Empty the 3-liter jar. Pour the 2 liters of water from the 5-liter jar into the 3-liter jar. Fill up the 5-liter jar again. Pour enough water from the 5-liter jar into the 3-liter jar to fill it completely (this will take 1 liter). Now, you are left with 4 liters of water in the 5-liter jar, which gives you the required 8 liters of water.
9
Let's say the total solution is 100 liters. 50 of the liters is glucose and 50 is water. We want to make the 50 glucose equal to 10% of the total solution. For that to happen, we need to make the total solution 500 liters (50 of the 500 would be a 10% solution). So we add 400 liters of water to the original 100 liter (50/50) solution. Take the total number of units and multiply by 4. Add that much in water.
1.41 liter 1 liter = 4.22 cups 1 cup = 0.23 liter
Tell me what else is in the solution. Solution containing a liter of vinegar plus a tablespoon of salt--the vinegar is the solvent. Solution containing a liter of vinegar plus a thousand liters of water--the water is the solvent. (Solutes can be either solid, liquid or gas--oxygen, a gas; diethylene glycol, a liquid; and salt, a solid, all dissolve in water.)
It is 103 liters
Fill a container three times using the 7-liter jar (which will give you 21 liters), then take out water with the 11-liter jar (which will give you 10 liters).
You have 6 litres of alcohol in 24 litres of water You need to add x litres to make 6 equal to 15% of 30 + x. 6 is 15% of 40, so x = 10
684 ml
If the concentration of alcohol and water solution is 25 percent alcohol by volume, the volume of alcohol in a 200 solution is 50.