You can't change a length into an area.
pipe length = 5487mm pipe size = 6inch
please tell me i have installed 500 square meter pipe that means how much length of pipe has been install To calculate square meters, multiply the length of the area in meters by the width in meters.
The volume of a pipe with diameter of 1 meter and a length of 2 meters is 1.57 cubic meters.
For the inner area, multiply...the inner diameter x pi x the length of the pipe.For the outer area, multiply...the outer diameter x pi x the length of the pipe.
The answer depends on the cross section of the pipe and its length.
It is the length, so 4 metres.
Surface area of the pipe: diameter*pi*length but make sure that the diameter and length are both in meters or inches.
1 meter = 39.4 inches 1 inche = 0.025 meters
A 1-meter length of 102mm inside diameter pipe has a volume of: 1.797 cubic Imperial gallons or 2.159 US gallons.
The volume of water in one meter of a 22mm-diameter pipe is: about 0.1 US gallons.
Surface area of an open pipe = 2*pi*radius*length or pi*diameter*length in square units.
A measure of the length will be in linear units. So make sure that the measurement is made or expressed in metres.