0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
What is the take off angle of a Boeing 737?
About 15 degrees for a few seconds then lowered to about 10
How do you get out of hades layer in mythology island?
there should be some geysers of mud with the blocks on it to take you up so then you can jump and get off it there are two there both located at both sides of hades castle.
How do you get the torch on time tangled island?
When you use the gunpowder (from 1593 AD) to blast open the cave on the Viking island (831 AD), you receive a torch with a limited lifespan. You must make it to the hidden Golden Vase before the torch goes out.The path is a semicircle up and right, then down and left. Go down, up, up ,up, across, down and left, avoiding the three water puddles at the bottom.Bad TorchTo "carry" the torch, put on the Glider Wings outside the cave, then take them off inside the cave. You can carry the torch. Unfortunately it doesn't give off any light!
What way do you twist the ball on your tragus earring to get it off?
lefty loosy righty tighty... left to get it off,,right to get it on =) Thats right if you're looking at it head-on. But, you're looking at the piercing from the back so its the opposite.
what does tangential mean?
a person that goes off subject while explaining their past
What is the take off formula off 45 degree elbow pipe?
The take off formula of a 45 degree elbow pipe, will depend on what the pipe is on. Sometimes a 45 degree pipe will need a 90 degree right angle turn to come off.
What is the take off for a 26 inch 90 degree elbow?
39in.
Can you use 0.625 multipide by pipe size to calculate take off for 45 degree elbow?
this app help you: "Miter Flat Pattern Design" in play.google.com
What is the take off measurement for 6 Victaulic 22.5 degree elbow fitting?
1-13/16"= The tangent of half the degree X the radius of the elbow.
What is the take off of a 90 degree elbow with 1 inch diameter?
2 inches
How do you get the take off 90 degree elbow pipe?
Measure to the center of the Ell and decuct for the threads ..
What is the take off for a half inch screwed 90 degree elbow?
1/2 inch
What is the take off measurement of 45 degree elbow 18 inches pipe?
11 1/4
For pipefitters what is the take off on a 6 inch short radius 90 degree ell?
Short Radius 90 degree elbows are the same as pipe size.... Long Radius 90's are pipe size times 1.5.... so a 6" (SR) elbow is 6"... a 6" (LR) elbow would be 9"
What is the difference between long radius and short radius elbow?
In the area of industrial pipe fittings: Long radius 90 deg elbow has a take off dimension of one and one half times the nominal diameter of the pipe. Ex-4 inch pipe has an actual diameter of 4.5, for the elbow the take off dimension would be 4"*1.5=6". The short radius elbow take off dimension is the same as the nominal size, 4". To add to the point, a short radius elbow can be used typically where space is a constraint. Hence fluid flow is also restricted in this case unlike in case using of Long Elbow.
Do you have to take off the manifold to get to the thermostat on 93 camaro?
nope, just take off your intake elbow(rubber piece ) and its right on the top of the water pump
Where is the thermostat located on a 1991 Oldsmobile regency 98?
follow the top radiator hose to the intake manifold... there will be an elbow its connected to. take off the elbow and under it will be your thermostat.
