10 amps
There are zero amps in a 2 mm copper wire. The amps capacity (ampacity) of a copper 2 mm wire is 20 amps. A 2 mm wire is equivalent to a #12 AWG wire.
It will taken 8 amps <<>> The conversion of 2.5 sq mm wire to AWG is equal to a #12 wire. The ampacity of a #12 copper wire with an insulation factor of 90 degrees C is 20 amps.
If you mean 2/0 copper wire it is rated 175 amps. # 2 wire is 115 amps. If you are referring to 2.0 metric it is rated 15 amps.
# 4 copper wire short distance.
A #8 copper wire with an insulation factor of 75 or 90 degrees C is rated at 45 amps.
Ground is sized based on the size of the feeder wire and not the amps of the service! However, for a 600 amp service 1500MCM copper wire is one option (NEC 310.16) ;therefor, ground wire is 3/O copper (NEC 250.66) or another option is a two sets of 350 MCM copper wire then a #2 copper (since the biggest feeder wire is 350MCM).
55 amps on copper wire.
It will taken 8 amps <<>> The conversion of 2.5 sq mm wire to AWG is equal to a #12 wire. The ampacity of a #12 copper wire with an insulation factor of 90 degrees C is 20 amps.
1 mm2 aluminium wire is not easy to buy but 1 mm2 copper wire is rated at 10 amps. Since the conductivity of aluminium is 7/12 that of copper, 1 mm2 aluminium wire would be rated at 7½ amps max (the same amount of heat is produced per metre by a current of sqrt(7/12) times that for copper).
#14 copper wire is rated at 15 amps, # 12 copper is rated at 20. The maximum capacity of any wire is 80% so remember to derate your current by multiplying the rated current by .8
You are probably thinking about 1/0 wire (1 ought wire). In copper it is rated at 175 amps and in aluminum 125 amps.
If you mean 2/0 copper wire it is rated 175 amps. # 2 wire is 115 amps. If you are referring to 2.0 metric it is rated 15 amps.
The normal current capacity of 12 AWG copper wire is 20 amps.
Need to know the wire size.
A #10 copper wire in a NMD90 cable is rated at 30 amps.
Service wire for 100 amps requires AWG #3 copper.
Copper wires do not hold amps, they have a cross sectional area capacity to allow amperage to flow. In the electrical trade this is spoken of as "ampacity" of the wire. It is a combining of the two words amps and capacity. A # 2 copper wire with an insulation factor of 60, 75 or 90 degrees C is consecutively rated at 100, 115 and 120 amps.
A #8 copper wire with an insulation rating of 90 degrees C is rated at 45 amps.