0
What else can I help you with?
How many pounds is 608 kilogram?
60.8 kilograms = 134.04 pounds. The formula to convert kg to lbs 60.8 kg* 2.2046 lbs 1 kg = 134.0410554 lbs
What are the ballistics for a 140 grain 7mm magnum Winchester ballistic tip bullet?
The velocity for a 140 grain bullet is 3100 fps.at the muzzle,2996 at 50 yards,2894 at 100 yards,at 500 yards it's 2156.The foot pounds are 2988 ft/lbs. at the muzzle,2605 ft/lbs at 50 yards,2410 ft/lbs. at 100 yards and at 500 yards it's 1445 ft/lbs.
How do you convert feet into lbs for spools of thread?
Yu cannot because thread comes in different linear densities.
What does it mean when test strength of beading thread is said to be fifteen lbs?
That is the amount of weight it will take to pull on the thread to break it.
1 cubic yard of wood chips would be how many tons?
how many yards are in a ton of wood chips 2000 pounds equals a ton 500 lbs equals one yard 4 yards equals one ton 9000 lbs equals 4.5 tons not 2.5 tons (typo error)
Does 576 oz or 38 lbs weigh more?
38 lbs weighs more than 576 oz. 1 lb is equivalent to 16 oz, so 38 lbs is equivalent to 608 oz, which is more than 576 oz.
How many 50lbs bags 2.5 yards of sand?
49 bags. The density of loose sand is about 90 lbs/cu. ft. There are 27 cu. ft. in a cu. yard. Therefore 27 * 90 equals a total weight of 2,430 lbs. for a cu. yard of sand. Given 50 lbs. per bag of sand, you divide 2430 by 50 and get 48.6 bags of sand. Round up to 49.
40 metric tons of 25mm road base limestone is equal to how many cubic yards?
I do not deal in metric tonnes, but maybe the following will help. We use 25 short tons (2000 lbs per ton) is equal to 19 cubic yards.
What is the density with a volume of 40 cubic yards and a mass of 2000 pounds?
The density is 50 lbs/yards3
How many lbs is 900 kilograms?
It is 1900 lbs in lbs.
How many cubic yards in 4720 lbs of trash?
To convert pounds to cubic yards for trash, you need to know the density of the trash in pounds per cubic yard. The density can vary depending on the type of trash. Once you have the density, you can use the formula: Cubic yards = (Weight in pounds) / (Density in pounds per cubic yard).
What are the torque specs for flywheel to crankshaft for 98 jeep wrangler?
105 ft lbs if its a 4.0. dont forget the blue thread locker.
