The area is 6 x 6 = 36 square feet
1 sheet is 4 x 8 = 32 square feet, not quite enough
So you will need 2 sheets
To cover a rectangle-shaped floor measuring 16x12, you will need 6 4x8 sheets of plywood. Arrange the sheets so that the longer side of the sheets line up along the longer edge of the floor.
Assuming the plywood comes in 4' by 8' sheets you would need 6 sheets to cover a 12' by 16' area.
It depends on the size of the plywood sheets (usually 8ft x 4 ft, but not always) and also on what units used to measure the 24 x 42 area that you wish cover: inches, feet, metres?
It depends on how big a sheet of plywood you are talking about.
Area of a sheet of plywood = 4' x 8' = 32. 1700ft2/32ft2 = 53.125 54 sheets of 4' x 8' plywood would be needed to cover 1700ft2.
To cover a rectangle-shaped floor measuring 16x12, you will need 6 4x8 sheets of plywood. Arrange the sheets so that the longer side of the sheets line up along the longer edge of the floor.
Assuming the plywood comes in 4' by 8' sheets you would need 6 sheets to cover a 12' by 16' area.
It depends on the size of the plywood sheets (usually 8ft x 4 ft, but not always) and also on what units used to measure the 24 x 42 area that you wish cover: inches, feet, metres?
It depends on how big a sheet of plywood you are talking about.
Area of a sheet of plywood = 4' x 8' = 32. 1700ft2/32ft2 = 53.125 54 sheets of 4' x 8' plywood would be needed to cover 1700ft2.
If each sheet of plywood measures 4x8 feet, then each sheet covers an area of 32 square feet. To find the number of sheets needed to cover the floor, divide the total area of the floor (40 feet x 28 feet = 1,120 square feet) by the area covered by each sheet (32 square feet). Therefore, 35 sheets of plywood are needed to completely cover the floor.
To cover a 16x12 area you would lay 3 sheets side by side on the 8' edge cover 12' x 8'. 12' x 16' is 2 12' x 8' areas. That means you need a total of 6 sheets.
Six (6) sheets exactly cover that area and that shape, without cutting anything.
First find the area of the floor and then the sheet of wood. 16*12=192 4*8=32 192/32=6 you need six sheets of plywood.
-- Plywood normally comes in 4-ft x 8-ft sheets = 32 square feet.-- The area you have to cover is 10-ft x 12-ft = 120 square feet.You need 120/32 = 33/4 sheets worth of material, but you'll have tofigure out for yourself how to cut it.
Multiply the width by the length, for area. So, 16x12=192Answer:American measured plywood comes in 4x8 sheets. The floor would be 2 sheets long (2x8=16) and 3 sheets wide (4x3=12) so you would need 3x2=6 sheets.
It depends upon which direction you put the plywood. You could use 4-8' lengths to cover the 32' by 11-4' lengths to cover the 43', cutting off 1 foot of the last row of sheets. That would be a total of 44 sheets. If you went the other direction, then it would take 8-4' lengths to cover the 32' and 6-8' lengths to cover the 43', cutting off 5' of the last row of sheets. This method would take a total of 48 sheets.