0
Add your answer:
Earn +20 pts
how much dirt is a liter of dirt?
A liter is a measurement of volume, so a liter of dirt is a liter of dirt. 1 liter = 1000 milliliters.
How much dirt does a 4x4 hole in the ground hold?
None. All of the dirt has been removed from that volume in order to construct the hole.
How much dirt makes a ton?
A ton of dirt is typically about 1 cubic yard in volume, which is equivalent to 27 cubic feet. This can vary depending on the density and moisture content of the dirt.
How much dirt would be in a hole 6 feet deep with a square edged sholve?
Without knowing the width of the shovel, it's not possible to calculate the volume of the hole. But whatever its volume is, there's no dirt at all in the hole.
How much dirt is in a hole that is 3ft deep and 6 inches in diameter?
None but the volume of space taken can be calculated
How much dirt will it take to fill an area of 55' x 9' x 1'?
Depends on the density of the dirt... howver, I can tell you that the volume of that area is 495 cubic feet.
How much dirt is in a hole by 3ft by 6ft by 6ft?
Traditionally, the answer to this question is that since the object in question is a hole, there is no dirt in it. If the question is inquiring as to the volume of the hole, however, the hole could potentially hold 108 ft3 of dirt.
How much dirt is in a hole that is 3 feet in diameter and 5 feet deep?
As it is a hole there is no dirt in it. However, a cylinder of dirt with radius 1.5ft, depth 5ft and a volume of πr2h ~= 35.34 cu ft has been removed.
Which as the greatest volume dirt rocks sugar or feathers?
It depends on how much of each substance you have. The more you have, the higher the volume. Therefore, it is impossible to determine without amounts of each.
How much dirt is there in a 6 feet deep hole and 10 inches in diameter?
None. It's a hole! If you mean how much volume of dirt was extracted to create that cylindrical hole: volume = π x radius2 x depth = π x (10/2 in)2 x 6 ft = π x (10/2 in)2 x (6 x 12 in) ≈ 5654 cu in ≈ 3.27 cu ft but note that if the dirt was dug out bit by bit and not extracted as a cylindrical core, the volume of the resultant heap of dirt will have a larger volume as there will be air included in it.
How much dirt in a square yard?
You can measure the surface of the dirt in square yards. That would be nine square feet.However the volume or amount of dirt cannot be measured in square yards or square feet. The amount of dirt in a volume of one cubic yard would be 27 cubic feet. ( 3x3x3=27 )The amount of dirt in a square yard to a depth of 0.5 feet would be 4.5 cubic feet. (3x3x0.5=4.5)
How much dirt is in a hole with the dimension of 4feet by 4feet by 4feet?
to be a smart alec none its a hole but the volume of he hole is 64 sqft
