answersLogoWhite

0

Calculate attic square footage, calculate how much free area you need by dividing the attic square footage by 300. Convert the square feet needed to inches. Split the amount of free area needed equally between the intake and the exhaust. Divide that by 60, for how many vents you'll need.

User Avatar

Wiki User

14y ago

What else can I help you with?

Continue Learning about Math & Arithmetic

Is an condo attic which owners maintain considered common area?

Read your governing documents to determine the line where your private ownership ends and common ownership ends.If it is common area:Owners (plural) maintain the attic area, this is proper, since it's possible that the attic is common area.Owners (plural) own the attic, it is subject to preventative maintenance, regular inspection and so forth.Owner (singular) maintains the attic area, that individual owner may be encroaching on real estate assets that belong to all the members.If it is private area: Owner (singular) actually owns the attic and it is not common area, the governing documents may require that this owner maintain the attic to some standard.If it is common area, by definition, and is used (maintained) by a single owner, the largest issues have to do with fire hazards, liability, and privilege.


How do you solve an equation for pulmonary ventilation?

Pulmonary Ventilation(dmcubed/min) = Tidal Volume (dmcubed) X Ventilation Rate (min)


How many syllables does attic have?

Two


Why do many older Chicago homes have 'below ground 1st floors'?

In 1856 the Chicago City Council ordered that all street grades be raised to insure proper sewage drainage. By lifting the street levels four to seven feet


How do you find the square footage of a attic?

To find the square footage of an attic, you first need to measure the length and width of the attic space in feet. Next, multiply the length by the width to calculate the total square footage. For example, if the attic is 20 feet long and 15 feet wide, the square footage would be 20 x 15 = 300 square feet. This calculation will give you the total area of the attic in square feet.

Related Questions

How can I insure that I have proper attic ventilation?

The Federal Housing Administration recommends that you have at least one square foot of attic ventilation for every 300 feet of attic space. You can find out if you have enough by figuring out how many square feet you have in your attic and then figure out the lineal feet that your exhaust fan puts out.


Why is it important to have proper attic ventilation?

Proper attic ventilation help reduce energy bills and extends the life of the roof. Temperature can be lost through the attic if not ventilated properly. Ventilation can also help keep homes safe and free from any structural damages.


What is the purpose of attic ventilation baffles and how do they contribute to the overall ventilation system in a house?

Attic ventilation baffles help to ensure proper airflow in the attic space by preventing insulation from blocking the vents. They contribute to the overall ventilation system by allowing air to flow freely, reducing moisture buildup, and helping to regulate the temperature in the attic.


What is the purpose of an attic baffle and how does it help in maintaining proper ventilation in the attic space?

An attic baffle is a device installed in the attic to ensure proper ventilation by allowing air to flow freely between the insulation and the roof. This helps prevent moisture buildup, reduces the risk of mold and mildew, and maintains a consistent temperature in the attic space.


How can I ensure proper ventilation in my attic by installing a ridge vent?

To ensure proper ventilation in your attic by installing a ridge vent, you need to first measure the length of your roof ridge and then choose a ridge vent that matches that length. Next, you will need to cut a slot along the peak of your roof to install the ridge vent. This will allow hot air to escape from the attic, while cooler air is drawn in through the soffit vents. Proper installation is key to ensuring effective ventilation in your attic.


Should your attic be vented?

Yes, it is recommended to have proper attic ventilation to prevent moisture buildup, heat accumulation, and to extend the life of the roof. Ventilation helps regulate temperature and humidity levels in the attic, which can reduce the risk of mold growth and damage to the structure.


How to install soffit vents for proper attic ventilation?

To install soffit vents for proper attic ventilation, first determine the number and location of vents needed. Then, cut holes in the soffit, install the vents, and seal any gaps to prevent air leaks. This will allow fresh air to enter the attic and help regulate temperature and moisture levels.


Proper Attic Ventilation 101?

Home attic ventilation is a necessity for every home. There are 2 main reasons why attic ventilation is a must. Heat accumulation and moisture damage are issues that can hinder homeowners depending on the season. Heat Accumulation During the warm and hot months, heat accumulates in the attic. When Summer is at it’s peak and temperatures near 100 degrees Fahrenheit, the attic can reach over 150 degrees. If a home has poorly insulated ceilings, the air conditioner spends more time running than necessary. This can really affect the electric bills. Adding attic ventilation can reduce the temperature of the attic to only 5-10 degrees above the outside heat temperature. This greatly reduces the demand on your air conditioner. The affect is lower electric bills. Attic ventilation helps hot air to escape the attic. Without proper ventilation, hot air is trapped in the attic. Ventilation gives hot air a means to get out of the attic. Moisture Damage Winter brings cold, damp days. The moisture gets trapped in the rafters and attic space. Without ventilation, the moisture builds up in the attic, which can lead to damage. Moisture speeds up deterioration of insulation and other materials found in the attic. In addition to the deterioration, you can wind up with a serious mold issue. Anytime you have to get mold removal services, you are talking high expense. Ventilation enables fresh air to clear out moisture and prevent it from building up. Types of Ventilation There are a few different types of ventilation. Natural vents allow nature to do it’s job of providing fresh air and pushing out heat and moisture. Attic fans can be a great ventilation tool. Attic fans can be electric and solar. The cost of running electric fans are still cheaper than the cost of heat and moisture remaining in your attic. Solar fans are economical because you purchase them, install them and the costs are over, while the benefits continue. Attic heat and moisture can cause unwanted expenses for home owners. The simplest solution is proper attic ventilation. Home owners have a number of choices in ventilation options. No matter what choice for ventilation a home owner chooses, ventilation is a necessity to lower electric bills and prevent moisture damage.


What can I do make sure I have proper attic ventilation, and what are different types of ventilation systems?

I would recommend putting in roof vents. We have this same problem with our attic and we have put in roof vents and also insulated it so that we can keep the heat down throughout the rest of the house.


How many soffit vents do I need for proper ventilation in my home?

The number of soffit vents needed for proper ventilation in your home depends on the size of your attic and the type of roof you have. As a general guideline, it is recommended to have 1 square foot of ventilation for every 150 square feet of attic space. This typically translates to about 1 soffit vent for every 150 square feet of attic space. It is best to consult with a professional to determine the exact number of vents needed for your specific situation.


Which direction does the air flow out of an attic ventilation fan Out of the attic or brings air into the attic?

The air moved by an attic ventilation fan blows out, sucking in fresh cooler air through the intake vents, commonly around the eaves or overhangs of the attic.


What is the purpose of attic vent baffles and how do they help with proper ventilation in the attic?

Attic vent baffles are designed to ensure proper airflow in the attic by creating a clear path for air to move from the soffit vents to the roof vents. They help prevent insulation from blocking the airflow and reduce the risk of moisture buildup, which can lead to mold and other issues. Ultimately, attic vent baffles help maintain a healthy and well-ventilated attic space.