0
Calculate attic square footage, calculate how much free area you need by dividing the attic square footage by 300. Convert the square feet needed to inches. Split the amount of free area needed equally between the intake and the exhaust. Divide that by 60, for how many vents you'll need.
Add your answer:
Earn +20 pts
Is an condo attic which owners maintain considered common area?
Read your governing documents to determine the line where your private ownership ends and common ownership ends.If it is common area:Owners (plural) maintain the attic area, this is proper, since it's possible that the attic is common area.Owners (plural) own the attic, it is subject to preventative maintenance, regular inspection and so forth.Owner (singular) maintains the attic area, that individual owner may be encroaching on real estate assets that belong to all the members.If it is private area: Owner (singular) actually owns the attic and it is not common area, the governing documents may require that this owner maintain the attic to some standard.If it is common area, by definition, and is used (maintained) by a single owner, the largest issues have to do with fire hazards, liability, and privilege.
How do you solve an equation for pulmonary ventilation?
Pulmonary Ventilation(dmcubed/min) = Tidal Volume (dmcubed) X Ventilation Rate (min)
How many syllables does attic have?
Two
Why do many older Chicago homes have 'below ground 1st floors'?
In 1856 the Chicago City Council ordered that all street grades be raised to insure proper sewage drainage. By lifting the street levels four to seven feet
How do you find the square footage of a attic?
To find the square footage of an attic, you first need to measure the length and width of the attic space in feet. Next, multiply the length by the width to calculate the total square footage. For example, if the attic is 20 feet long and 15 feet wide, the square footage would be 20 x 15 = 300 square feet. This calculation will give you the total area of the attic in square feet.
How can I insure that I have proper attic ventilation?
The Federal Housing Administration recommends that you have at least one square foot of attic ventilation for every 300 feet of attic space. You can find out if you have enough by figuring out how many square feet you have in your attic and then figure out the lineal feet that your exhaust fan puts out.
Why is it important to have proper attic ventilation?
Proper attic ventilation help reduce energy bills and extends the life of the roof. Temperature can be lost through the attic if not ventilated properly. Ventilation can also help keep homes safe and free from any structural damages.
Should your attic be vented?
Yes, it is recommended to have proper attic ventilation to prevent moisture buildup, heat accumulation, and to extend the life of the roof. Ventilation helps regulate temperature and humidity levels in the attic, which can reduce the risk of mold growth and damage to the structure.
Proper Attic Ventilation 101?
Home attic ventilation is a necessity for every home. There are 2 main reasons why attic ventilation is a must. Heat accumulation and moisture damage are issues that can hinder homeowners depending on the season. Heat Accumulation During the warm and hot months, heat accumulates in the attic. When Summer is at it’s peak and temperatures near 100 degrees Fahrenheit, the attic can reach over 150 degrees. If a home has poorly insulated ceilings, the air conditioner spends more time running than necessary. This can really affect the electric bills. Adding attic ventilation can reduce the temperature of the attic to only 5-10 degrees above the outside heat temperature. This greatly reduces the demand on your air conditioner. The affect is lower electric bills. Attic ventilation helps hot air to escape the attic. Without proper ventilation, hot air is trapped in the attic. Ventilation gives hot air a means to get out of the attic. Moisture Damage Winter brings cold, damp days. The moisture gets trapped in the rafters and attic space. Without ventilation, the moisture builds up in the attic, which can lead to damage. Moisture speeds up deterioration of insulation and other materials found in the attic. In addition to the deterioration, you can wind up with a serious mold issue. Anytime you have to get mold removal services, you are talking high expense. Ventilation enables fresh air to clear out moisture and prevent it from building up. Types of Ventilation There are a few different types of ventilation. Natural vents allow nature to do it’s job of providing fresh air and pushing out heat and moisture. Attic fans can be a great ventilation tool. Attic fans can be electric and solar. The cost of running electric fans are still cheaper than the cost of heat and moisture remaining in your attic. Solar fans are economical because you purchase them, install them and the costs are over, while the benefits continue. Attic heat and moisture can cause unwanted expenses for home owners. The simplest solution is proper attic ventilation. Home owners have a number of choices in ventilation options. No matter what choice for ventilation a home owner chooses, ventilation is a necessity to lower electric bills and prevent moisture damage.
What can I do make sure I have proper attic ventilation, and what are different types of ventilation systems?
I would recommend putting in roof vents. We have this same problem with our attic and we have put in roof vents and also insulated it so that we can keep the heat down throughout the rest of the house.
Which direction does the air flow out of an attic ventilation fan Out of the attic or brings air into the attic?
The air moved by an attic ventilation fan blows out, sucking in fresh cooler air through the intake vents, commonly around the eaves or overhangs of the attic.
How to fix a roof that has mold in the attic?
Not sure about ridding it of the existing mold, but the conditions which caused it can usually be remedied with adequate attic ventilation. Call an experienced roofer or contractor or have your attic ventilation system inspected.
Why do new homes not have attic fans?
New homes may not have attic fans because they are often designed with more energy-efficient features, such as proper insulation and ventilation systems, that can help regulate the temperature in the attic without the need for a fan. Additionally, attic fans can sometimes create negative pressure in the house, causing issues with heating and cooling systems.
How do you cool a hot attic?
You can cool a hot attic by installing attic ventilation like ridge vents or soffit vents to allow hot air to escape and cool air to circulate better. Additionally, adding insulation on the attic floor can help prevent heat from transferring into the living spaces below. Using a fan or attic ventilation system can also help keep the space cooler.
What can Broan parts be used for?
Broan parts can be used for ventilation in houses - they sell bath and shower ventilation systems, range hood ventilation parts, attic ventilation, heaters, and also parts for trash compaction systems.
When installing hardiplank should you close the gabels?
As long as you have adequate ventilation elsewhere in the attic
How do you install attic vent fans?
To install an attic vent fan, first determine the best location for it on your roof. Then, cut a hole in the roof and install the fan according to the manufacturer's instructions. Finally, connect the fan to a power source and ensure proper ventilation in your attic. It's recommended to hire a professional for this task if you're not experienced with roofing work.
