0
What else can I help you with?
What is half of 95 feet?
47ft 6in
How long is an African bull elephants tail in feet?
the tail is 47ft
Isuzu rodeo 97 head gasket torque specs?
Sohc engine m11 bolts 47ft lbs, m8 bolts 180in lbs DOHC engine step1 21ft lbs step2 47ft lbs
What are the tightening sequences for a Isuzu trooper 3.2?
Start in center of head, in circle pattern work your way to out side first 21ft pounds then 47ft pounds
How do you figure square feet 47 ft long by 30ft wide?
You multiply the length by the width, i.e. 47ft x 30ft = 1,410 square feet.
If you throw a baseball 80 mph from 47 feet how fast do you throw a baseball from 54 feet?
The equivalent of an 80mph pitch from 47ft at 54ft is 54/47*80 = 91.9 mph.
What is the biggest carnivorous dinosaur?
Spinosaurus 40-60ft long 17-20ft tall (at head) T-rex 37-50ft long 14-23ft tall Giganotosaurus 40-47ft long 18ft tall Carcharodontosaurus 40-45ft long 18ft tall
What is the tallest Pokemon?
you can view your pokedex for things like that in the future, but the tallest Pokemon is walroad, at a WHOPPING 47ft (it is a whale after all)True, but it is actually spelled Wailord.
How many knots in 41 kilometers?
Nonsensical question. 'Knot' is a measure of speed or velocity and kilometre of distance or length. The two are not compatible. You might as well ask how many ounces are in a kilowatt. To cover 41 kilometres/hour you would be sailing (presumably) at 22.14knots or 22.13 UK knots. Originally the knots that gave their name to the unit were placed at intervals of 47ft 3in along a rope. I suppose - in a round about way - you could say that there would therefore be 341.62 knots in your 41km but I suspect that isn't the answer you were looking for...
What are the torque specifications on a 2003 Saturn VUE V6 oil pan bolts?
Two sets of bolts - small (pan itself), large (4ea, pan to tranaxle housing.Pan bolts (small) are two lengths. The longer are across the rear. Two stage torque sequence, working center out in a crisscross pattern. Tighten all pan bolts first (first stage), then tighten again to final spec (second stage). NOTE THAT THESE ARE IN INCH-POUNDS, NOT FT-LBSFirst stage - 57in-lbsSecond stage - 106in-lbsPan to transaxle - 4ea. Two at center, one each outer sides. Tighten center bolts first, then outer.47ft-lbsGood luck!
