No, code does not allow that.
12 AWG.
Yes, if you are using AWG # 10 wire. If you are using AWG # 12 then the answer is no you must use a 20 amp breaker. On AWG #14 wire you must use a 15 amp breaker.
You need to know the amperage to size the wire. For 220 V at 20 A you would need 12 AWG. At 220 V at 30 A 10 AWG.
No, the 20 amp (AWG #12) wire will be too small, you need to use AWG #10 wire. Even though 4500 watts is less that the 20 amp it can only be loaded to 80% by NEC rules which is 18.75 amps. The #12 wire would be overloaded so defiantly use AWG #10.
Use a 20 amp fuse or breaker.
12 awg is larger.
Size 12 in the American Wire Guage (AWG). It's a wire of about 1/10 inch diameter.
Yes, 12 AWG is good for 25 Amps if copper wire.If aluminum wire, then good for 20 Amps.
12 AWG.
12 gauge is thicker. Household wires in the walls are mostly ga 14. Majority of wires in the car wiring are ga 16, except control wires which are thinner, like ga 18 or 20, and main battery wires wich are very thick, probably ga 4 or 6.
The larger the AWG number the smaller the wire. 10 AWG wire can carry more current than 12 AWG wire.The wire sizes of 24 and 26 are the smallest that are used in the electrical.See related links below
I think you mean either what is the correct size or minimum wire size needed when a branch circuit is protected by a 20 A breaker. The size is 12 American Wire gauge (AWG). 14 AWG is used for 15 A circuit and 10 AWG for a 30 A breaker. The lower the gauge the larger the cross-section of the wire.
The diameter of the wire measured in MCM, (thousand circular mils). Wire sizes in the U.S. are described in AWG, (American Wire Gauge) such as #12 awg printed on the wire.
Yes the ampacity of #12 is 20 amps whereas the ampacity of #14 is 15 amps, so you are well within the range using #12 wire.
AWG 12.
Yes, if you are using AWG # 10 wire. If you are using AWG # 12 then the answer is no you must use a 20 amp breaker. On AWG #14 wire you must use a 15 amp breaker.
Yes, a 20 amp breaker requires AWG # 12 copper wire. A 15 amp breaker requires AWG # 14 copper wire.