13mm diameter & 3100 length pl. give me weight
Density of steel: 7.85 g/cm3 Volume of the steel would be: 0.6*0.6*pi*1200=1357.168 cm3 =10653.77grams=10.65kg.
The weight of 1 foot of steel rod would depend on the diameter of the rod.
This depends on what type of steel. The density of carbon steel (one of the most common types of steel) is 7.85g/cm3Density = m/vradius of rod = 3.25mm (radius is 1/2 of diameter)3.25mm = .325 cm1 meter = 100cmvolume of cylinder = (pi)(radius)^2(h) = 33.18Density * Volume = mass7.85 * 33.18 = 260.46260.46 grams
The volume is 150.152 cm3. The density of steel varies according to the constituents but is normally between 7.75 and 8.05 grams per cm3. Using g = 9.8, this range would give a weight in the range 11.4-11.8 Newtons.
Is it foot or 30mm? You need to know what kind of steel first, With steel been a iron-alloy you can have 1000,s of different kinds and each has a different weight
Weight per metre length= 0.559 kg
A mild steel ERW tube 25mm diameter with 2mm wall with 1000 mm length weighs about 1.2kg
Piping Project is one of the leading Steel Plate Weight Chart in kg. The weight of a circular bar is subject to various factors, such as its diameter, length, and composition. The Steel Plate Weight Chart in mm typically comprises a tabular representation of the diverse parameters, including diameter, length, and weight. A Steel Plate Weight Chart is a planar, rectangular sheet of steel that exhibits uniform thickness across its entire surface.
weight of all steel can be calculated by multiplying unit volume with density.
Density of steel: 7.85 g/cm3 Volume of the steel would be: 0.6*0.6*pi*1200=1357.168 cm3 =10653.77grams=10.65kg.
=D^((D^2/162) L) D^2 = Diameter of the rod L = Length of the rod
DxD/162 this is the formula for finding unit weight of steel
volume of steel multiplied by7850= wt of steel in kgs. Please note that wt of 1 Cum steel is 7850 kg Volume of steel bar can be calculated = cross-sectional area of bar X length cross-sectional area of Bar= pie x d X d/4 (where d is diameter of bar)
3.85
You look up the density of steel, then calculate the volume of the rod, then multiply the density by the volume to find the mass of the rod. To find the weight of the rod, you multiply it's mass by gravataional acceleration.The rod has a cross sectional area of Pi x (0.008 / 2)2 m2Volume of the rod = 1 x 5.027x10-5Steel has a density of approx. 7850 kg/m3.Mass = Density x VolumeMass = 7850 x 5.027x10-5Mass = 0.395 kgWeight = 0.398 x 9.81Weight = 3.871 Newtons
"16 mm" probably refers to the diameter. The mass of a steel bar depends not only on its diameter, but also on its length.
hello dude...... First find the area as u done length*breadth*height. Then multiply it with density of that sheetmetal. if it is steel (density is 7850 kg/m3). make sure your units of m (those in area). Now u got the weight of that sheet metal Cheers lax pushpak_tech@yahoo.in