0
What is the weight of a steel rod whose dimensions are 6.5mm diameter and 1 meter length?
Wiki User
∙ 14y ago
This depends on what type of steel. The density of carbon steel (one of the most common types of steel) is 7.85g/cm3
Density = m/v
radius of rod = 3.25mm (radius is 1/2 of diameter)
3.25mm = .325 cm
1 meter = 100cm
volume of cylinder = (pi)(radius)^2(h) = 33.18
Density * Volume = mass
7.85 * 33.18 = 260.46
260.46 grams
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
What is weight of a MS rod whose dimensions are 10 mm diameter and 1 meter length?
10mm ms rod for waight
What is the volume of a pipe with diameter of 1 meter and length of 2 meters?
The volume of a pipe with diameter of 1 meter and a length of 2 meters is 1.57 cubic meters.
Is there a difference between a meter and a square meter?
Yes. A meter is a unit of length (1 dimension), a square meter is a unit of area (2 dimensions).
What would you use the meter measurement for?
You should use meter only for length, In metric a... Meter = Length Gram = Weight Liter = Volume
What will be the surface area of pipe if pipe dia is 6 inch and length is 7.5 meter?
Surface area of the pipe: diameter*pi*length but make sure that the diameter and length are both in meters or inches.
What is weight of a MS rod whose dimensions are 10 mm diameter and 1 meter length?
10mm ms rod for waight
What is the weight per meter length of 12mm dia ms rod?
The weight of a 12mm diameter mild steel (MS) rod per meter length can be calculated using the formula: Weight = (Diameter^2) x 0.00617 where Diameter is in mm. Therefore, for a 12mm diameter MS rod, the weight per meter length would be approximately 0.888 kg.
What is the weight of 1 tmt rod?
the weight should be change by the diameter of the rod.one rod length is thirteen meter and it should be measured in meter only. The formulae to find the weight of rod is d square /162 and you wil get unit weight then multiply it in length then u got a weight of the rod.
What is the weight of 10010010 Mm ms steel angle per meter length?
The dimensions of the steel are required.
Calculate the weight of ms pipe having diameter of 250 mm and one meter length?
D=Diameter L=Length ={(D^2)/(162)*L}
What is the weight of 75x10 mm gi flat per meter length?
The weight of a GI flat with dimensions 75x10 mm per meter length can be calculated as follows: 75mm x 10mm x 0.00785 (density of steel) = 5.8875 kg/meter.
What weight one meter?
A meter of what? Meter is a unit of length, not of weight.
What is the weight of 1 meter SS SHAFT?
The weight of a 1 meter stainless steel shaft will depend on the specific grade and dimensions of the shaft. To calculate the weight, you would need to know the diameter and thickness of the shaft, as well as the density of the stainless steel material being used. You can use online calculators or reference materials to find the weight based on these factors.
What is the weight of 1meter length of 10mm sariea?
The weight of 1 meter length of 10mm diameter Saria (steel reinforcement bar) can vary depending on the density of steel used and the specific composition of the Saria. On average, a 1 meter length of 10mm diameter steel bar would weigh approximately 0.6-0.8 kilograms. It's best to refer to the manufacturer's specifications for precise weight information.
What is the weight o ms round bar sof diameter varying from 8mm to 250 mm per meter length?
Weight of MS Round Bar is calculated as ((Diameter in mm)^2)/162.
What is weight of 8mm dia steel?
The weight of steel can vary depending on the specific type and grade. However, a rough estimate for the weight of 8mm diameter steel rod can be calculated using the formula: Weight = (Diameter^2) x 0.006165, where the weight will be in kilograms per meter.
What is the volume of a pipe with diameter of 1 meter and length of 2 meters?
The volume of a pipe with diameter of 1 meter and a length of 2 meters is 1.57 cubic meters.
