0
Add your answer:
Earn +20 pts
Weight of 12mm diameter steel of 12 meter length?
Density of steel: 7.85 g/cm3 Volume of the steel would be: 0.6*0.6*pi*1200=1357.168 cm3 =10653.77grams=10.65kg.
What is the weight of a steel rod whose dimensions are 6.5mm diameter and 1 meter length?
This depends on what type of steel. The density of carbon steel (one of the most common types of steel) is 7.85g/cm3Density = m/vradius of rod = 3.25mm (radius is 1/2 of diameter)3.25mm = .325 cm1 meter = 100cmvolume of cylinder = (pi)(radius)^2(h) = 33.18Density * Volume = mass7.85 * 33.18 = 260.46260.46 grams
What does one foot of 1 steel rod weigh?
The weight of 1 foot of steel rod would depend on the diameter of the rod.
What is the weight of a steel rod whose dimensions are 22mm diameter and 395mm in length?
The volume is 150.152 cm3. The density of steel varies according to the constituents but is normally between 7.75 and 8.05 grams per cm3. Using g = 9.8, this range would give a weight in the range 11.4-11.8 Newtons.
What is the weight per foot of 12mm diameter steel?
Is it foot or 30mm? You need to know what kind of steel first, With steel been a iron-alloy you can have 1000,s of different kinds and each has a different weight
What is the weight of 1meter length of 10mm sariea?
The weight of 1 meter length of 10mm diameter Saria (steel reinforcement bar) can vary depending on the density of steel used and the specific composition of the Saria. On average, a 1 meter length of 10mm diameter steel bar would weigh approximately 0.6-0.8 kilograms. It's best to refer to the manufacturer's specifications for precise weight information.
What is a weight of 10mm diameter steel bar?
Weight per metre length= 0.559 kg
What is weight of 25mm diameter mild steel pipe?
A mild steel ERW tube 25mm diameter with 2mm wall with 1000 mm length weighs about 1.2kg
Where Can You Find a Steel Plate Weight Chart?
Piping Project is one of the leading Steel Plate Weight Chart in kg. The weight of a circular bar is subject to various factors, such as its diameter, length, and composition. The Steel Plate Weight Chart in mm typically comprises a tabular representation of the diverse parameters, including diameter, length, and weight. A Steel Plate Weight Chart is a planar, rectangular sheet of steel that exhibits uniform thickness across its entire surface.
How do you calculate unit weight of steel?
weight of all steel can be calculated by multiplying unit volume with density.
How do you calculate the weight of galvanized steel pipe?
To calculate the weight of a galvanized steel pipe, you need to know the length, diameter, and thickness of the pipe. Use the formula: weight = (outer diameter - thickness) x thickness x 0.02466 x length. This formula assumes the density of steel as 7850 kg/m^3 and the length in meters.
What is weight of 8mm dia steel?
The weight of steel can vary depending on the specific type and grade. However, a rough estimate for the weight of 8mm diameter steel rod can be calculated using the formula: Weight = (Diameter^2) x 0.006165, where the weight will be in kilograms per meter.
Weight of 12mm diameter steel of 12 meter length?
Density of steel: 7.85 g/cm3 Volume of the steel would be: 0.6*0.6*pi*1200=1357.168 cm3 =10653.77grams=10.65kg.
What is the weight per meter length of 12mm dia ms rod?
The weight of a 12mm diameter mild steel (MS) rod per meter length can be calculated using the formula: Weight = (Diameter^2) x 0.00617 where Diameter is in mm. Therefore, for a 12mm diameter MS rod, the weight per meter length would be approximately 0.888 kg.
What is the weight of 20mm diameter steel bar per meter?
=D^((D^2/162) L) D^2 = Diameter of the rod L = Length of the rod
What is the weight of one foot of three quarter inch diameter steel bar?
The weight of one foot of a three-quarter inch diameter steel bar will be approximately 1.42 pounds.
How many is the weight of different diameter steel bar per meter?
DxD/162 this is the formula for finding unit weight of steel
