AWG # 10
Normally a new kitchen stove will require a 50 amp breaker wired with AWG # 6/3 with ground wire.
the size of the wire that you need to run depends on the the amperage of the device/appliance you'll be hooking up to that line. Use #12 wire for 20 amp, #10 for 30 amp, #8 wire for 40 amps and #6 for 50 amps. Hope that helps.
No, 10 gauge wire requires the use of a 30 amp breaker. A 20 amp breaker is only used on 12 gauge wire.
You never, ever mix wire sizes within a circuit. However you can wire a 30 amp circuit using AWG # 8/3 wire, although that is overkill and AWG #10 wire is what you would normally use on a 30 amp circuit.
AWG # 10
no. depending on length of run you'll need either 10 or 6 gauge wire for a 30 amp double pole breaker.
12 AWG in most circumstances.
(coulomb) A quantity of electric charge. Passage of 1 coulomb per second along a wire is called 1 amp (ampere) of electric current.
yes as i have tried it
A hob will have to be on it's own circuit, usually a radial fed from the consumer unit. The reason for this is when you work out your amperage 7200 Watt divided by 230 Volts this gives you 31 Amp which is why you can't wire it into your existing ring main. With other appliances switched on it would keep tripping the protective breaker at the consumer unit.
wire gauge is used to determine the size of the wire to be installed based on the amperage draw of whatever is being hooked up on the receiving end. ie 14 gauge is for a 15 amp circuit, 12 gauge is for a 20 amp circuit, 10 gauge 30 amp etc. to get specific amp draw ratings on a particular gauge of wire look at a current National Electric code book or ugly book.
5900/230 or 240(volts) gives you 25.65 & 24.58 Amps Retrospectively, Stick it on a 32A breaker.
If you have 100 amp wire, you can use it for a 60 amp circuit, or for any circuit of 100 amps or less. But if you have a 60 amp circuit, 60 amp wire is thinner and cheaper than 100 amp wire.
I just used it to run my 50 amp electric stove. You can use it for a small sub-panel.
40 amp
Normally a new kitchen stove will require a 50 amp breaker wired with AWG # 6/3 with ground wire.