0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
What gauge wire you would use to wire a 5kw heater hvac?
At 120 Volts you would draw about 42 amps. At 240 Volts it would be about 21 amps. For 120 Volts you would need 6 AWG and for 240 Volts you would need 10 AWG.
What amps is for 16 gauge wire?
10
What can you use 10 gauge wire for?
ten gauge wire is used for high current circuits. in home wiring, 12 gauge wire is normally used. 12 gauge wire can carry a maximum of 20 amps. 10 gauge wire on the other hand, is larger and can carry more current. the maximum current capacity of a 10 gauge wire is around 30 amps. one would use this for a stove, hvac or other power hungry device's.
What size of wire needed for 220volt?
Wire is not sized by voltage. It is sized by current measured in amps. Some common copper wire sizes and their current capacities are: 15 amps -- 14 gauge wire 20 amps -- 12 gauge wire 30 amps -- 10 gauge wire 40 amps -- 8 gauge wire
Does a 20 amp circuit require a number 12 gauge wire?
12 guage wire israted for 20 amps and 10 guage is rated for thirty amps! 12 gauge is what is required, as it is rated for 20 amps. 10 gauge is rated for 30 and will be more then enough. Oversizing wire in your case isn't necessary. The thicker 10 gauge wire is harder to work with and will more then likely cost more.
What is ampere rating of 10 gauge wire at 120 volts and at 240 volts?
30 amps.
What size copper wire do you need for 240 volts 16 amps at 150ft?
10 gauge
What gauge wire would you need 5600 watts 240 volts 23.3 amps?
AWG # 10.
What gauge wire is required for 25 amps over 100 ft at 240 volts?
10 AWG copper.
What gauge wire you would use to wire a 5kw heater hvac?
At 120 Volts you would draw about 42 amps. At 240 Volts it would be about 21 amps. For 120 Volts you would need 6 AWG and for 240 Volts you would need 10 AWG.
What size wire for 10kw 240 volt?
10 mm2 cross section should be sufficient (#6 wire?)
What gauge wire can handle 28 amps?
10 guage
If I have 150ft of 10 gauge wire with 60 amp service how many amps and watts do I have available at the end of the line?
10 gauge wire will only run up to 30 amps
What is the amperage limit of 10 gauge solid wire?
Typically 30 amps.
What amps is for 16 gauge wire?
10
How many amps is a 16 gauge wire 12 volts rated for?
12 ga, 20 amp. 14 ga, 15 amp. 16 ga, 10 amp.
What can you use 10 gauge wire for?
ten gauge wire is used for high current circuits. in home wiring, 12 gauge wire is normally used. 12 gauge wire can carry a maximum of 20 amps. 10 gauge wire on the other hand, is larger and can carry more current. the maximum current capacity of a 10 gauge wire is around 30 amps. one would use this for a stove, hvac or other power hungry device's.
