It is the Cartesian plane that has an horizontal x axis and a vertical y axis on which co-ordinates of x and y are plotted on it.
It is the Cartesian plane
You need an x axis, y axis, and 4 quadrants.
A line plot can be made using fractions. Just use fractions rather than whole numbers or other data to mark the scales of the horizontal axis and vertical axis
The horizontal x axis and the vertical y axis which intersect at right angles at the point of origin (0, 0) are use to plot points on the coordinated plane.
On the horizontal axis you would probably plot the time. On the vertical axis you could plot displacement, velocity or acceleration.
It is the Cartesian plane
You need an x axis, y axis, and 4 quadrants.
A line plot can be made using fractions. Just use fractions rather than whole numbers or other data to mark the scales of the horizontal axis and vertical axis
there on a whole different plane. your x axis is labeled real not x and your y axis is labeled imaginary not y. then just plot the points like you normally would.
When plotting ordered pairs,always begin at the point of origin (center) and plot along the x axis line first then on the y axis line second/next.☺♥
Decide on whether or not you want to or need to plot all the data points. Select one of the variables and round its maximum up and round its minimum down. If the minimum is near zero then round it to zero. Divide the range = rounded max minus rounded min by 10. That is a suitable unit to use on the axis for that variable. Do the same with the other axis. You are then ready to go.
X = 4 is a vertical line, 4 units to the right of the y-axis.
The horizontal x axis and the vertical y axis which intersect at right angles at the point of origin (0, 0) are use to plot points on the coordinated plane.
X-axis
On the horizontal axis you would probably plot the time. On the vertical axis you could plot displacement, velocity or acceleration.
You plot the magnitude of the angle along the horizontal axis and the value of the trigonometric ratio on the vertical axis.
first you draw another column and then from the grouped data you write the midpoints then you plot the frequency, and make sure also you are plotting the mid points for example: frequency 0<10 6 you would plot 5 in the x axis and 6 in the y axis