0
What else can I help you with?
What is 28 cfr part 36?
Its title is:Nondiscrimination on the Basis of Disability by Public Accommodationsand in Commercial Facilities
What is 28 cfr part 23?
Section 28, Code of Federal Regulations, part 23, governs criminal intelligence system operating policies. For example, how often files need to be reviewed and how frequently they need to be purged if they are no longer supporting active cases or investigations.The rules are targeted towards State and local law enforcement agencies. Federal agencies have their own set of rules.See also: http://edocket.access.gpo.gov/cfr_2002/julqtr/28cfr23.20.htm
What is the name of the rule that requires the surface be guarded?
The rule that requires surfaces to be guarded is commonly referred to as the "Guarding Rule" or "Machine Guarding Standard." In the United States, this is primarily outlined under the Occupational Safety and Health Administration (OSHA) standards, particularly 29 CFR 1910.212, which mandates that machines and equipment be equipped with proper guards to protect operators and other employees from hazards.
How many hours can 14 year work on weekends?
According to the Department of Labor (assuming for the US): Minors age 14 and 15 may work outside school hours in various nonmanufacturing, non-mining, nonhazardous jobs listed by the Secretary in regulations published at 29 CFR Part 570 under the following conditions: no more than three hours on a school day, 18 hours in a school week, eight hours on a non-school day, or 40 hours in a non-school week. In addition, they may not begin work before 7 a.m. or work after 7 p.m., except from June 1 through Labor Day, when evening hours are extended until 9 p.m. The permissible work for 14 and 15 year olds is limited to those jobs in the retail, food service, and gasoline service establishments specifically listed in the Secretary's regulations. Those enrolled in an approved Work Experience and Career Exploration Program (WECEP) may work up to 23 hours in school weeks and three hours on school days (including during school hours)
Can a Zone 3 built manufactured home be sold in a Zone 4 area?
Each manufactured home must be designed according to the federal Manufactured Home Construction and Safety Standards at 24 CFR 3280, commonly called the HUD Code. The HUD Code stipulates, at §3280.305(c)(1) and §3280.305(c)(2), that the home shall be designed and constructed to conform to one of three wind load zones. The appropriate wind zone used in design is dependent on where the home will be initially installed. Homes designed and constructed to a higher Wind Zone can be installed in a lower Wind Zone (a Wind Zone III home can be installed in a Wind Zone I or II location). However, a Wind Zone I home cannot be installed in either a Wind Zone II or III area. This is from the Manufactured Housing Institute Website. For maps etc go to http://www.manufacturedhousing.org/lib/showtemp_detail.asp?id=203&cat=technical
What parts of the 49 CFR defines hazard labeling requirements?
49 CFR, Part 172.400
Which 49 CFR part would you research to locate treatment disposal applicable permitting procedures and technical standards instruction for hazardous WMM?
40 CFR Parts 260 through 270
What is 21 CFR part 50?
21ct Pr21 CFR part 50 Human Subject Protectionotection
What are CFR parts 1915 1917 and 1918 referred to as?
29 cfr parts 1915 1917 and 1918 are referred to as maritime employment or maritime industries. Part 1915 is titled "Occupational Safety and Health Standards for Shipyard Employment," part 1917 is titled "Marine Terminals," and part 1918 is titled, "Safety and Health Regulations for Longshoring."
Which part of 49 CFR should be referenced for package marking requirements?
49 CFR 172.300
What section of the 49 cfr covers function specific training?
49 CFR, Part 172.704(a)(2)
What are 29 CFR part 1915 and 1917 and 1918 referred to as?
29 cfr parts 1915 1917 and 1918 are referred to as maritime employment or maritime industries. Part 1915 is titled "Occupational Safety and Health Standards for Shipyard Employment," part 1917 is titled "Marine Terminals," and part 1918 is titled, "Safety and Health Regulations for Longshoring."
What are CFR 1915 and 1917 and 1918 referred to as?
29 cfr parts 1915 1917 and 1918 are referred to as maritime employment or maritime industries. Part 1915 is titled "Occupational Safety and Health Standards for Shipyard Employment," part 1917 is titled "Marine Terminals," and part 1918 is titled, "Safety and Health Regulations for Longshoring."
What cfr subjects us recreational and uninspected passenger vessels to voyage termination?
33 CFR Part 177
Latest revision of 10 CFR Part 21?
http://www.nrc.gov/reading-rm/doc-collections/cfr/part021/
What are the OSHA general industry standards called?
The OSHA General Industry standards are also called 29 CFR Part 1910, or 29 CFR 1910
Is part 1926 the general industry standard?
No. 29 CFR Part 1926 contains the OSHA Construction Industry Standards. The General Industry Standards are in 29 CFR 1910.
