210Type your answer here...
200 ml X .50 = 100 ml
70% alcohol has been found to be more effective in killing microbes.Higher and lower concentration may not be as effective.90% alcohol coagulate proteins in contact.suppose 90% alcohol is poured over one celled organism,the alcohol penetrate the cellwall of the organism.the coagulated protein would then prevent the alcohol further from the cell and no more coagulation then take place.now,if 70% alcohol is added into one celled organism.The diluted alcohol also coagulates the protein, but at a slower rate,so that it penetrates all the cell before coagulation.Then all the cell coagulated and the organism died.
I personally just put some 65% ethyl alcohol hand sanitizer on mine, and it burnt really bad for a minute or two. 70% probably won't kill you. Feelin' so fresh!
70% alcohol means in hundred parts of it, 70 parts are pure alcohol, rest is water. 95% means 95 parts of pure alcohol in 100 parts, so 5 parts of water. It depends on the usage. As a solvent, 95% would be preferred. As antiseptic, both can be used, 75% being more common as medicinal spirit. For consumption, fairly dilute concentrations are preferred. Above 43% are rare so both the above concentrations are dangerous for consumption.
20%
Usually zero ml because ethanol is not normally used in rubbing alcohol. However, there is a little Ethanol-based rubbing alcohol and rubbing alcohol is usually 70 percent, so multiply 50 ml x .7 to get your answer.
Rubbing alcohol is diluted isopropanol. The formula for isopropanol is (CH3)2CHOH or simply C3H8O.
Usually zero ml because ethanol is not normally used in rubbing alcohol. However, there is a little Ethanol-based rubbing alcohol and rubbing alcohol is usually 70 percent, so multiply 50 ml x .7 to get your answer.
Usually zero ml because ethanol is not normally used in rubbing alcohol. However, there is a little Ethanol-based rubbing alcohol and rubbing alcohol is usually 70 percent, so multiply 50 ml x .7 to get your answer.
This is a solution containg 60 percent isopropyl alcohol; can be used as rubbing alcohol.
I believe it's ethyl alcohol. Also I think rubbing alcohol is 70% isopropyl alcohol and 30% water.. Hope i helped!Rubbing alcohol is a solution of 70% isopropyl alcohol (also called isopropanol or 2-propanol), and 30% Deionized water.Ethyl alcohol is something entirely different.Note that there are also different solutions of Isopropyl alcohol that can also be used for disinfecting and first aid, but Rubbing alcohol is the household name for the 70% Isopropyl alcohol solution.
2/3 of 70% and 1/3 of 10%
.
Commonly the concentration of ethanol in rubbing alcohol is 70 %.But because many recipes exist, read the label on the bottle; don't drink rubbing alcohol.
Rubbing alcohol is 70% isopropyl alcohol, so you wouldn't use it since it contains some water. Use 99% isopropyl alcohol instead.
Because the concentration of alcohol is lower; you pay the alcohol not the water.