If you are asking for the volume of a prism with an 800 sq. ft. base and a height of 9 feet, the answer is 7200 cubic feet.
A cubic foot is a square, 1ft by 1ft by 1ft. It is equal to 1728 cubic inches or 12x12x12. If you had one square foot with something one foot high occupying the one square foot area, you would have 1 cubic foot. cubic feet measures volume, square feet area, and just plain feet or linear feet distance.
A cylinder with a diameter of 1 foot and 3 feet high has a surface area of 11 square feet.
The area of that wall would be 138 square feet.
It is 1.5 metres.
There is no sensible answer to this question. A square foot is a measure of area, with dimensions [L2]. A cubic foot is a measure of volume, with dimensions [L3]. Basic dimensional analysis teaches that you cannot convert between measures with different dimensions without additional information.
(a) each what covers 25 square foot?(b) what do you want to know?
A cubit is a foot and a half.A cubic foot is ... not something that you can compare to a length. It could be a mile square and a tiny fraction of an inch high; it could be miles high and a tiny fraction of an inch square.
That's going to depend on how many rooms there are in the house, and how high the ceilings are. Neither of those numbers can be calculated from "2500 square feet".
It was 48 inches high !
It depends on how thick each square foot is! Actually, a square foot isn't "thick" at all, so you could theoretically stack up an infinite number of them and still not reach the one foot high you would need to make a cubic foot. (cubic feet) = (square feet) × (height in feet)
A square foot is a two dimensional measurement, it could mean 150 feet high and 150 feet wide or that the building is 150x150 feet wide.
A cubic foot is a unit of volume, not area, so it does not directly convert to square feet. To find the number of square feet in a cubic foot, you would need to know the dimensions of the surface you are trying to cover. If you are looking to cover a square surface with a side length of one foot, then the area would be one square foot.