The volume is 3,848 cubic inches per linear inch of 70-inch diameter pipe. In terms of liquid volume, this pipe would contain 16.66 gallons of liquid per linear inch.
The volume of water in a 4-inch diameter, 1-foot section of pipe is 0.6528 gallons of water.
Approx 21.2 cubic inches.
A pipe with an inside diameter of 2 inches has 37.7 cubic inches (rounded) of interior volume per foot. That means about 6feet 1.5inches per gallon.
To calculate the gallons per foot in a 40-inch diameter pipe, you first need to find the volume of one foot of the pipe. The formula for the volume of a cylinder is (V = \pi r^2 h). For a 40-inch diameter pipe, the radius is 20 inches (1.67 feet), and the height (length) is 1 foot. This gives a volume of approximately 17.7 cubic feet, which is equivalent to about 132 gallons. Thus, a 40-inch pipe contains approximately 132 gallons per foot.
A 100-foot pipe with an inside diameter of 12 inches has a maximum volume of about 78.54 gallons of water.
Assuming that 0.75 inch refers to the diameter, the volume is pi*(0.75/2)2*12 = 5.3 cubic inches, approx.
I'm assuming that "4 inch" is the inside diameter of your pipe.Then its volume is roughly-- 0.6528 gallon per foot-- 1.9584 gallon per yard-- 3.264 gallons per 5 feet.etc.
The pipe's volume is the product of its cross-sectional area and its length. The area of a circle is pi*(radius)^2, so in this case pi*9sq.in. or about 28.3 square inches. Multiply this area by the length of pipe you are using to obtain a volume. A 10 foot length of 6 inch pipe will have 3393 cubic inches of volume or 1.96 cubic feet, or 14.7 US Gallons.
The volume of a 1-inch diameter pipe with a length of 1 foot is approximately 0.0137 gallons. This calculation is based on the formula for the volume of a cylindrical pipe (πr^2h) where r is the radius of the pipe (0.5 inches) and h is the length of the pipe in feet.
To calculate the volume of water in a pipe, first convert the diameter to feet (28 inches = 2.33 feet). Then use the formula for the volume of a cylinder (V = πr^2h) where r = radius (half the diameter) and h = height. For a 2.33-foot diameter pipe and 1 foot height, the volume is roughly 17.19 gallons of water per foot.
The maximum flow rate for a 1 inch diameter pipe is typically around 8-12 gallons per minute. To calculate the maximum volume, you would need to multiply the flow rate by the amount of time the water is flowing.
First, you need to find the volumn of the pipe which is L x R2 x Pi; and the units need to be consistent. Let's use inches, since that is the diameter of the pipe. (20 feet x12inches) x 42 x 3.141 = 240inches x 16inches x 3.141 = 12,061.44 cubic inches of volumn in the pipe. There are 231 cubic inches per US gallon - (looked it up on the Internet.) Therefore, divide the cubic inch volumn of the pipe by the number of cubic inches per gallon 12,061.44/231= 52.214 gallons. This is the amount of water the pipe can hold.