0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
What Formula for long radius 45 degree elbow?
1.414. x offset- Straight of 45's
How do you find out the lenght of a piece of a pipe on a 45 degree angle?
Can you measure the distance from the corner to either end of the pipe ? The length of the pipe is (1.414) times that distance.
What is the Pipe fitting formula for 45 degree elbow?
1.4142 will give you the travel piece C-C then you deduct for the fitting
What is pipefitting formula for 45 degree offset?
whatever the offset is times it by 1.414 and this will give you your travel then just take off the centres of the 45's and you have your cut length....for instance if the offset is 12 inchs you multiply it by 1.414 you come up with 16.968..meaning 1 foot 4 inchs 15/16 just thought alittle clarity might help if the person was new in trade.
Can you use 0.625 multipide by pipe size to calculate take off for 45 degree elbow?
this app help you: "Miter Flat Pattern Design" in play.google.com
Calculate 45 degree offset when the travel is known?
A 45 degree offset has a travel of 200mm. calculate the rise of the offset.
What is oblique offset in surveying?
offset that are not situated 90 degree rather that are situated in any angle like 60 degree or 45 degree
What is the take off formula off 45 degree elbow pipe?
The take off formula of a 45 degree elbow pipe, will depend on what the pipe is on. Sometimes a 45 degree pipe will need a 90 degree right angle turn to come off.
What Formula for long radius 45 degree elbow?
1.414. x offset- Straight of 45's
What is the formula for a rolling offset with 2 45's?
There are many types of rolling offsets. 2 common are rolling offset using 45 degree fittings and a rolling offset using any angle. using 45's Rise: elevation change roll: run of the pipe moving to the left or right Travel: the run of pipe to make the offset Simple formula Travel = SQRT((rise(squared) + Roll(squared) ) x 2) rise = 10" roll= 16" Travel=? travel= SQRT ( ((10 x 10) + (16 x 16)) x 2 ) travel= SQRT ( ((100) + (256)) x 2 ) travel= SQRT ( ( 356 ) x 2 ) travel= SQRT ( 712 ) Travel= 26.68333 or 26-11/16"
Formula for a 45 degree offset?
1.4142 will give the travel piece center to center
What is the pipe fitting formula for 30 degree elbow?
In all offsets to determine the travel you must multiply the set in inches by the cosecant of the angle required. For Example: The cosecant of 30 degrees is 2 The cosecant of 15 degrees is 3.86 The cosecant of 45 degrees is 1.414 Say your offset needed to travel 2 feet on a 15 degree angle. 24" x 3.86 = 92.64" or 7' 8 5/8" Say your offset needed to travel 2 feet on a 30 degree angle. 24" x 2 = 48" or 4' Say your offset needed to travel 2 feet on a 45 degree angle. 24" x 1.414 = 33.94 or 2' 9 15/16
What is the formula 45 degree elbow?
15.875 x pipe size=
What is the formula for a 45 degree lateral on 6 inch weld pipe?
formula for a 6" 45 degree lateral onto a 6" main
What an 8 inch 90 degree pipe fitting take off when rolled 45 degrees?
90 degree angle rolled on a 45
What multiplier would be used for EMT conduit to make a 45 degree offset bead?
The multiplier for a 45 degree bend is 1.4142 (rounded off to 1.4) times the height of the offset. All offset multipliers are the cosecant of the angle. (inverse of the sine of the angle). However, 45 degree offsets are very difficult to pull wire through and should be avoided. Always bend your EMT to the shallowest angle you can for the distance you have to do it in.
What is the formula for pipe length between 45 degree elbows?
Tan 45/2*dia*1.5*25.4
