0
The pressure is only dependent on the height of water above the measuring point. 1 psi corresponds to a height of 2.3 ft, so 8 ft = 3.5 psi The pressure is only dependent on the height of water above the measuring point. 1 psi corresponds to a height of 2.3 ft, so 8 ft = 3.5 psi
What else can I help you with?
What is the height of a column of water where the pressure at the bottom of the column is 20.0 lb inch squared?
It is approx 46.3 feet.
How many pound of water pressure is at 15000 feet?
THE GALLONS have NO Bearing on the pressure it would have to do with the HEIGHT and then if you wanted to know the WEIGHT you would take the 1,500 gallon and times it by 8.33
How to calculate water pressure from flow rate?
To calculate water pressure from flow rate, you can use the formula: Pressure Flow Rate x 0.433 x Height. This formula takes into account the flow rate of the water in gallons per minute and the height of the water column in feet. By multiplying the flow rate by 0.433 and the height, you can determine the water pressure in pounds per square inch (psi).
33.11 ft in psi?
To convert a height of 33.11 feet to pressure in psi (pounds per square inch), you can use the formula that relates height in feet of water to pressure: 1 foot of water is approximately equal to 0.4335 psi. Therefore, 33.11 feet of water would be approximately 33.11 ft × 0.4335 psi/ft, which equals about 14.35 psi.
What is the ratio of feet in the air to pounds per square inch of water pressure at use point for a gravity water system?
2.31 feet of water depth exerts a presssure of one pound per square inch. A column of water 10 ft high exerts 4.33 PSI (static pressure) To prove take 4.33 times it by 2.31 = 10.00 ft
How much water pressure to raise water 1 foot?
To raise water 1 foot vertically, you need approximately 0.433 pounds per square inch (psi) of water pressure. This means that for every additional foot of height, the pressure increases by about 0.433 psi. Therefore, to elevate water to various heights, you can multiply the height in feet by this value to find the required pressure in psi.
What is the water pressure at 1000 feet in pounds?
The water pressure at 1000 feet is approximately 433 pounds per square inch (psi). This is because for every 2.31 feet of depth in water, the pressure increases by 1 psi due to the weight of the water column above.
Water pressure from a gravity fed tank with a 200 foot evelvation drop?
~0.0361 PSI per inch of height 0.0361PSI * 12 inches * 200 Feet = 86.64PSI
Calculate water pressure?
Pressure (Static) is 0.433*(H). H in feet. answer in pounds/sq inch
What is the pressure exerted at the base of a water riser by a column of water in a riser 95 feet high?
The pressure exerted at the base of a water riser by a column of water is determined by the height of the column above the base. In this case, with a column of water 95 feet high, the pressure at the base would be approximately 41.1 pounds per square inch. This calculation is done using the formula P = ρgh, where P is pressure, ρ is density of water, g is acceleration due to gravity, and h is the height of the column.
How much pressure is exerted on every square inch of a person at 1250 feet under water?
The pressure at 1250 feet under water is approximately 543 pounds per square inch (psi). This means that every square inch of a person at that depth would experience a pressure of 543 psi.
How do you figure out PSI at the bottom of a vertical pipe filled with water?
Measure the height of the pipe, in inches. Then the pressure at the bottom is approx 14.7 + 0.036*H PSI.
