0
The sizing of wire is dependant on what the amperage or wattage of the range is. Most new homes are pre-wired for a standard size range. The wiring is #8 with a insulation factor of 90 degree C and rated for 40 amps. This feeder is protected by a 40 amp breaker.
If the amperage or wattage is larger than this, then a larger conductor must be installed. Use this equation if you need to change wattage into amperage. I = W/E, Amps = Watts/Volts. If the range is in kilowatts multiply the kilowatt number by 1000 to change it to watts to use in the equation.
Wiki User
∙ 8y ago
Anonymous
Add your answer:
Earn +20 pts
What size wire to use to install a thermostat?
Use what is called bell wire or thermostat wire.
What size wire do you need to run overhead to a 50 amp service five hundred feet away?
For that distance I would run AWG # 3 copper and install a sub-panel.
What size breaker can you use on a 7500watt generator?
Depends on the wire size you are using. If the generator breaker is a 30 amp then install a 30 amp breaker.
What size wire do you need for a 100amp braker?
Service entrance wire should be AWG #3 copper.
What wire size for 400 amp service neutral size?
You need to look at the regulations that apply in your country. If in doubt, use a neutral wire of the same size as the live wire or wires.
What size wire to use to install a thermostat?
Use what is called bell wire or thermostat wire.
What size wire do you need to wire a 200 am breaker box?
6
What size wire for electric cook top?
AWG # 6 copper or AWG # 4 aluminum
What size wire do you need for 440 three phase welder on an eight foot run?
The wire size depends on the amperage, not the voltage. The fact that the welder runs on 440 volts does not affect the wire size! You need to ask this question instead: What size wire do you need for a three phase welder on an eight foot run if the nameplate amps are 45A?
What size of electrical wire need to pass 50A?
Use AWG #6 wire.
What size wire do you need to run overhead to a 50 amp service five hundred feet away?
For that distance I would run AWG # 3 copper and install a sub-panel.
How do you wire a car stereo for a 1997 Lincoln mark 8?
When you buy a install kit you will need a wire kit it comes with instructions do one wire at a time.
What is the wire size for a 35 amp breaker to a ac unit?
You will need to use #8 wire.
What size breaker can you use on a 7500watt generator?
Depends on the wire size you are using. If the generator breaker is a 30 amp then install a 30 amp breaker.
Where can you get a fuseable link?
a fuseable link is just a length of wire that will carry a certain load. check the awg (american wire guage) ratings and install that size wire at the power source of that circuit
What size wire do i need for a 16500 btu marine ac?
Wire size is based on the amperage of the connected load. Without that amperage an answer can not be given.
Are additional parts needed to install this?
Yes, you will need a conduit connector and wire connectors to install the KitchenAid Architect II Microwave oven.
