answersLogoWhite

0


Best Answer

That depends on how much of each you're mixing. Good luck finding that -10 degree water.

User Avatar

Wiki User

12y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: What would be the temp of water when you mix -10 degree of water with 10 degree of water?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Continue Learning about Math & Arithmetic
Related questions

If you mix water and rubbing alcohol will it freeze?

not at the normal freezing temp for water. the mixture will have a lower freezing temp


Mix some 70 degree Celsius degree water with some 40 degree Celsius water and you'll get water at?

55 degrees celsius


How much antifreeze to use for 20 degree F temp?

Ford vehicles come from the factory with a 50 / 50 mix of distilled water and the correct type of antifreeze for the vehicle ( so it would depend on what amount the engine cooling system capacity is for your particular vehicle )


How much antifreeze?

A mix of 50% clean water and 50% straight antifreeze is good for most areas. If you live where the temp goes below -30 degrees F, a mix of 25% clean water and 75% straight antifreeze would be better.


Why does the water temp change in the shower when you flush a toilet?

The water temp in the shower is determined by the mix of hot and cold water that runs thru the showerhead at any given moment. When we wish to raise the water temp- we simply limit the flow of cold water, thereby slightly changing this mix. When we flush the toilet, its water tank immediately (and automatically) start to refill. Refilling obviously takes (cold) water straight from our home plumbing. If our plumbing consists of narrow pipes (or if its partly clotted), the water which is drawn by the toilet refill process runs at the expense of other water consumers - such as the shower. This, in turn, practically limits the amount of cold water thar runs to the showerhead, hence changing its temp.


What would happen if you mixed ink and water?

The ink would mix into the water and become diluted.


what would mix better with water?

Polar molecule’s


How do you make saltwater for aquarium?

You need to purchase a salt mix and add water. Then mix overnight and check the salinity the next day. You want it between 1020 and 1025. Also, make sure the water is the same temp as the aquarium. You may need a little heater in the salt water you are mixing.


Can you mix oil base stain with linseed oil?

No. Oil and water don't mix. -- Oil and water can be mixed. Emulsify it. You would need to mix in the oil slowly while stirring with an electric mixer. You would need to use a large enough quantity of paint for the mixer to be submerged.


What is beer mash?

The mash in beer is the mix of water and grains to make wort or un-fermented beer. The starches in the grain are converted to sugars by using water at a certain temp and the resulting sweet liquid is drained out.


What can not mix with water?

Oil can't mix with water.


What can mix with water?

Oil can't mix with water.