6 million miles
6 centimetres is a length: it does not have a diameter.
Since circumference equals pi times the diameter, if the diameter of a circle is 6, then its circumference is going to be pi times 6 or 6 pi.
If a circle has a circumference of 6 inches the diameter is: 1.91 inches (circumference divided by Pi = diameter).
The diameter is twice the radius so the answer is 12 millimeters.
The circumference of a 6 foot diameter circle is: 18.8 feet. (C = d x Pi)
A wire with a diameter of 4mm corresponds to a wire gauge of approximately 6 AWG (American Wire Gauge). The relationship between wire diameter and gauge is not linear, so different wire diameters can correspond to the same gauge.
4 AWG is larger than 6 AWG because the lower the number, the larger the wire size. In this case, 4 AWG has a larger diameter and can carry more current than 6 AWG.
The appropriate conduit size for accommodating 6/3 wire is typically 1 inch in diameter.
The recommended conduit size for accommodating 6/3 wire is typically 1 inch in diameter.
If the wire is increased in length, the diameter of the wire should remain the same unless explicitly changed. The diameter of a wire is determined by its cross-sectional area, which is independent of its length.
16-gauge wire has a diameter of 0.05082 inches.
The safe working load can be calculated using the 6 x 19 &. 6 x 36 classification.
509.30 ft.
Resistance is inversely related to the diameter of a wire. A larger diameter wire will have less resistance compared to a smaller diameter wire, assuming other factors like length and material remain constant. This is because a larger diameter wire provides more space for electrons to flow through, resulting in less resistance to the flow of current.
No, the wire with a diameter of 0.01 mm will have higher resistance compared to a wire with a diameter of 0.1 mm. Resistance of a wire is inversely proportional to its cross-sectional area, so a thinner wire will have higher resistance.
There isn't a specific diameter. The thicker the wire the more current it can convey. This diameter will be part of your calculations for your circuit.
Number 6 wire is thicker and can carry more current compared to number 12 wire. The American Wire Gauge (AWG) system is used to measure wire sizes, with lower numbers indicating thicker wires. Number 6 wire has a larger diameter and lower resistance than number 12 wire.