0
There is no set answer to your question. The power output depends on where the panels are located and what rating of panels you get. If you use a very low rated panel in poor sun it would be possible to cover a mall parking lot and not produce 3 kwh. On the other hand, if you use a high rated panel in good sun you could fit it on the roof of a house. Some areas of the world (just by their relationship to the equator) have more capacity to produce power due to increased sun intensity. 10ftx10ft of panels in India in good orientation to the sun could be tuned to produce double the power of the same panels in moderately good orientation in Alaska.
Add your answer:
Earn +20 pts
How many feet are in 18 square meters?
18 square meters is the same as 193.75 square feet.
How many square yards are in 330 feet?
These units arent compatible. square yard can be equivalent to square feet but not to feet.
How big in square feet is an average factory?
600000 square feet
Acre to square feet?
1 acre = 43,560 square feet
What is the total square footage for a 15x17 size room?
The area of 15 feet times 15 feet = 225 square feet.
How much space does solar panel need?
On average, a solar panel requires about 15-25 square feet of space. This can vary depending on the wattage and efficiency of the panel. It's important to consider factors like shading and orientation when determining the necessary space for solar panels.
How many square feet of solar panel is needed to replace the Vermont Yankee Nuclear Power Plant?
The Vermont Yankee Nuclear Power Plant had a capacity of 620 MW. A solar panel typically generates about 10-20 watts per square foot. Therefore, you would need approximately 31,000,000 to 62,000,000 square feet of solar panels to replace the power output of the Vermont Yankee Nuclear Power Plant.
How many panels are needed to generate solar power for home use?
There is no general easy answer to how many panels are needed for your exact home. This depends on how much power you use, how much rainfall you receive in your location, and other factors. A solar panel can create 70 milliwatts of power per square inch, so completely changing an average home's power usage to solar would require a solar panel that measures about 285 square feet, or about 26 square meters. This would cost around $16000. Without decreasing your lifestyle's dependency on electricity, powering your home exclusively through solar power is difficult.
How many square feet are in 3600 inches to the power 2?
3600 inches is 300 feet, so if you square that, you get 90,000 square feet.
How do you convert 15yards to the 2nd power to squard feet?
There are 9 square feet in a square yard, so 15 square yards = 15 x 9 square feet = 135 square feet.
How big is the PS10 solar Power tower?
The PS10 solar power tower in Spain is about 115 meters (377 feet) tall. It has a base diameter of approximately 40 meters (131 feet).
The largest volcano in the solar system is located on this planet.?
Olympus Mons, which has a peak of 69,649 feet, is the largest volcano in the solar system. It is on the planet Mars.
How many square feet in area are the Alaska range?
About 15,950,000,000,000 square feet or 1.595 x 10 to the 13th power.
What is 72 ft to the second power?
It is 5184 square feet.
How much is ten cubic feet in the MKS system?
10 cubic feet is 10 cubic feet regardless of the system. A square foot is 12x12x12 inches. It does not change.
If a home requires 3000 watts of electrical power how many square feet of photovoltaic solar cells would you need to power it?
The amount of solar panel space needed to power a home depends on multiple factors including the efficiency of the panels, average sunlight hours, geographical location, and energy consumption patterns. On average, one square foot of a typical solar panel can produce about 10 watts of power under ideal conditions. Therefore, a 3,000-watt system may require about 300 square feet of solar panels.
How much space does solar energy take up?
Solar energy systems can vary in size depending on the amount of energy required, but on average, they require about 100 square feet of space per kilowatt of power generated. This means that a typical residential solar panel system that generates enough energy for a household may require a few hundred square feet of space.
