346.7nm's
when an operator operate on a function and same function is reproduced with some numerical value then the function is called eigenfunction and the numerical value is called eigen value.
Dimensions can be more accurately calculated when using algabreic equations rather than numerical values.
(2x)2 = 4 x2 Its numerical value depends on the value of 'x'.
No I don't know... Plz give me the right answer
The Runge-Kutta method is one of several numerical methods of solving differential equations. Some systems motion or process may be governed by differential equations which are difficult to impossible to solve with emperical methods. This is where numerical methods allow us to predict the motion, without having to solve the actual equation.
You also need to know the wavelength :)
D = wavelength / NA condensor + NA objective D being minimum distance at which two points can be resolved....... wave length of light used......condensor and objective are the numerical apertures of the condensor lens and objective lens
Resolution of a microscope is tied to the numerical aperture of the objective lens and the condenser but is influenced by other factors, such as alignment, type of specimen, wavelength of light, and contrast enhancing techniques. Read more: Define Resolution in Microscopes | eHow.com http://www.ehow.com/facts_5753341_define-resolution-microscopes.html#ixzz1kYyrj6D9
The formula for the resolution of an objective lens isR = (1.22(lamda))/(2*(NA))Where (lamda) is wavelength and (NA) is the numerical aperture
To find resolution power of optical microscopes.
The minimum resolvable separation distance of a light microscope depends on the wavelength of illumination and the numerical aperature. Because the electron beam has a far smaller wavelength than light used in light microscopy, it achieves far better resolution and it doesn't even involve the NE.
If the numerical apertures of the condenser and low power objective lenses are 1.25 and 0.205 respectively and you are supplied with a filter that selects a wavelength of 521 nm then the answer is YES! 520/(1.25 + 0.25) = 347 nm and your two points in question are shorter in distance as they are only 330 nm apart.
[1] Brightness - How light or dark is the image? Brightness is related to the illumination system and can be changed by changing the voltage to the lamp (rheostat) and adjusting the condenser and diaphragm/pinhole apertures. Brightness is also related to the numerical aperture of the objective lens (the larger the numerical aperture, the brighter the image).[2] Focus - Is the image blurry or well-defined? Focus is related to focal length and can be controlled with the focus knobs. The thickness of the cover glass on the specimen slide can also affect your ability to focus the image -- it can be too thick for the objective lens. The correct cover-glass thickness is written on the side of the objective lens.[3] Resolution - How close can two points in the image be before they are no longer seen as two separate points? Resolution is related to the numerical aperture of the objective lens (the higher the numerical aperture, the better the resolution) and the wavelength of light passing through the lens (the shorter the wavelength, the better the resolution).[4] Contrast - What is the difference in lighting between adjacent areas of the specimen? Contrast is related to the illumination system and can be adjusted by changing the intensity of the light and the diaphragm/pinhole aperture. Also, chemical stains applied to the specimen can enhance contrast.
[1] Brightness - How light or dark is the image? Brightness is related to the illumination system and can be changed by changing the voltage to the lamp (rheostat) and adjusting the condenser and diaphragm/pinhole apertures. Brightness is also related to the numerical aperture of the objective lens (the larger the numerical aperture, the brighter the image).[2] Focus - Is the image blurry or well-defined? Focus is related to focal length and can be controlled with the focus knobs. The thickness of the cover glass on the specimen slide can also affect your ability to focus the image -- it can be too thick for the objective lens. The correct cover-glass thickness is written on the side of the objective lens.[3] Resolution - How close can two points in the image be before they are no longer seen as two separate points? Resolution is related to the numerical aperture of the objective lens (the higher the numerical aperture, the better the resolution) and the wavelength of light passing through the lens (the shorter the wavelength, the better the resolution).[4] Contrast - What is the difference in lighting between adjacent areas of the specimen? Contrast is related to the illumination system and can be adjusted by changing the intensity of the light and the diaphragm/pinhole aperture. Also, chemical stains applied to the specimen can enhance contrast.FROM VLA hacker
Use the Equation, Resolving Power=lambda/2(Numerical Aperture). So, given the values for Numerical Aperture(NA): If NA=0, then R=0, NA=0.2, then R=1500, NA=0.4, then R=750, etc. Simply solve the equation substituting the provided Numerical Aperture (NA) values in.
According to Rayleigh Criteria, resolution is determined by the wavelength of imaging light (λ) and numerical aperture (ΝΑ) of the projection lens. Thus resolution is given by the following equation. R = k1 λ/ NA Where k1 is the process parameter describing the difficulty of the process
S = (0.61 X λ)/(I x sin(x)) where: S = Resolution λ = wavelength I = Refractive index sin(x) = maximum angle of light gathering Both I and sin(x) are constants for a given objective lens, there product is referred to as N.A. or "Numerical Aperature".