0
In a bus topology, data transmission typically uses protocols such as Ethernet, specifically the Carrier Sense Multiple Access with Collision Detection (CSMA/CD) protocol. This protocol allows devices to detect when the bus is free and transmit data while monitoring for collisions. If a collision occurs, devices stop transmitting and wait for a random time before attempting to resend. Other protocols, like Token Ring, can also be adapted for bus topologies, but CSMA/CD is the most common.
What else can I help you with?
What is the application of bus topology?
ask OC transpo
Which network topology requires the use of terminators?
The bus topology requires the use of terminators. In this topology, all devices are connected to a single central cable, known as the bus. Terminators are placed at both ends of the bus to prevent signal reflection, which can cause data collisions and network interference. Without terminators, the signals can bounce back along the bus, disrupting communication between devices.
What is the common network of bus topology?
The common network of bus topology is a network where clients are connected through cables called a bus. You can learn more about this at the Wikipedia. Once on the website, type "Bus network" into the search field at the top of the page and press enter to bring up the information.
Which LAN topology involves the network cable forming a single bus to which every workstation is attached?
The LAN topology that involves the network cable forming a single bus to which every workstation is attached is called the bus topology. In this setup, all devices share a single communication line, and data travels in both directions along the bus. The main advantage of bus topology is its simplicity and ease of installation, but it can be prone to collisions and performance issues as more devices are added. Additionally, if the main cable fails, the entire network goes down.
What are advantages of a bus network topology?
Ease of operation Reliability Low Cost
What protocols should be used fro a star-bus topology?
1.) Mesh topology:- Routing protocol such as RIP(routing information protocol) or OSPF (open shortest path protocol) is used. 2.) Star topology:- Ethernet, token ring, Local Talk, ATM........... all are used... 3.)Bus topology:- Ethernet protocol using CS-MA/CD as access method.....
What type of topology is typically used by the Ethernet?
Either bus topology or star toplogy.
Where bus topology used?
Bus topology is used on a LAN, or a Local Area Network. It is the cable to which the nodes connect, and it is also known as a backbone.
Which topology should be used tere for networking in school lab?
Bus topology
Bus topology is the most popular topology justify?
Bus topology is the most popular topology. Justify.
When only a few microcomputers are to be linked then the bus network is typically used?
Bus topology LANs are very rare these days. It would be easier to use a star topology than a bus topology for a few devices.
Bus topology mesh topology star topology is commonly used?
Well, yes. Please correct your question, thanks!
Why terminators are used in a bus topology?
So that the Signal will not reflact back due to difference of permitivity of signals that causes destructive interfrance... They are used in End of Bus topology
What network topology connects to a trunk cable?
Bus Topology.
What is the fastest topology?
bus topology
What is the logical topology used for ethernet architecture?
Topology: physical ring of trees, logical ring
Which topology is the most commonly used client -server network topology?
star good luck on chapter 12!
