The Public Switched Telephone Network (PSTN) is primarily based on three topologies: the star topology, the ring topology, and the mesh topology. In a star topology, all devices connect to a central hub or switch, facilitating straightforward communication. The ring topology connects devices in a circular fashion, allowing data to pass in one direction, while the mesh topology offers multiple pathways between nodes for redundancy and reliability. Each topology serves distinct purposes in the overall structure of the PSTN.
The three most commonly used wide area network (WAN) topologies are point-to-point, hub-and-spoke, and mesh. In a point-to-point topology, a direct connection is established between two locations, providing a simple and efficient link. The hub-and-spoke model connects multiple remote sites to a central hub, facilitating easier management and data flow. Mesh topology involves interconnecting multiple nodes directly, allowing for redundancy and resilience, as each node can communicate with multiple others.
The logical topology of 100BASE-T Ethernet is a star configuration. In this setup, all devices (nodes) are connected to a central hub or switch, which facilitates communication between them. This structure allows for easy addition and removal of devices without disrupting the network and enables efficient data transmission through the centralized management of data traffic.
hub and spoke
In a star topology, the IP address serves as a unique identifier for each device connected to the central hub or switch. This allows devices to communicate with each other and the network efficiently by routing data packets to the correct destination. The IP address ensures that data can be properly directed across the network, facilitating seamless communication and resource sharing among connected devices.
Star topology
A star topology.
in star topology , the central hub is called...... (i) active hub (ii) passive hub (iii) inactive hub (iv) live hub
No, there is not.
both hubs and switch can act as a center of a star topology
No, because there is a hub between star topology and every station connect to that central hub. hub cause broadcast and congession since packet loss is more likely to occur. I suggest that mesh topology is more faster as there is a dedicated link to each node.
For a ring topology each client device is usually attached to a central hub, which is a managed hub, called an MAU or MSAU unit. It contains a grid that manages the electrical portion of the ring.
A network topology in which network nodes are connected in a circular configuration. Each nodes Examines the data sent through the ring and passes on data not addresses to it.this iz ring topology A network layout or design in which each node is connected to a central hub. The hub establishes, maintains and terminates all connections between the nodes. In a LAN, the hub is likely to be a workstation, whereas in larger multi-point networks the hub is more likely to a multiplexer.this is star topology jyoti bhubanesw3ar
A network star topology has all the clients connect to a central device, such as a hub or switch. The clients look like points of a star, hence the term star topology.
If by Star you mean a Star Topology, it is a network cabling scheme in which all nodes are individually connected to a central hub.
Star Topology is the most common type of network topology that is used in homes and offices. In the Star Topology there is a central connection point called the hub which is a computer hub or sometimes just a switch. In a Star Network the best advantage is when there is a failure in cable then only one computer might get affected and not the entire network.
which controller hub is known as the norhtbridge